Question 1

A buyer wants exclusivity or a distributorship. How should I handle it?

Accepted Answer

Treat exclusivity as something bought with volume, not granted with hope. If you agree to it, tie it to a minimum annual purchase, a defined territory, a fixed term, and an automatic reversion to non-exclusive if the volume is missed, and put it in writing before the first order rather than after. Be careful with requests for exclusivity before any trading history, and be careful about registering trademarks or product approvals in the distributor's name rather than your own, because that is difficult and expensive to unwind if the relationship ends.

Question 2

What should a first reply to a buying requirement contain?

Accepted Answer

Answer the buyer's stated quantity, specification and delivery point directly, then give price and currency, the Incoterm with the named port or place, minimum order quantity, packing and units per carton, lead time measured from a stated event, payment terms and how long the offer is valid. Add a short numbered list of anything the requirement left blank that you need in order to firm the price. Do not lead with a company introduction and a catalogue; buyers comparing several suppliers read the numbers first.

Question 3

The buyer has not stated an Incoterm. What should I quote?

Accepted Answer

Quote FOB at the port you normally ship from, and offer CFR or CIF to their nearest main port as an alternative in the same message. FOB is the cleanest basis for a buyer comparing suppliers, and offering the freight-inclusive alternative shows you can handle the shipment if they would rather you did. Always name the port or place after the term. Be cautious about volunteering DAP or DDP to a new buyer, since those put freight risk, and with DDP import duty and clearance, on you in a country whose rules you may not know.

Question 4

How do I tell whether a buying requirement is real?

Accepted Answer

Look for a specific specification rather than a bare category name, a quantity that is realistic for the product, a named delivery place, a stated timeframe, and a company you can find in an independent register. Then ask two or three precise questions and see what comes back. Real buyers answer a numbered list. Requests that are only for your lowest price with no volume, or for free samples before any commercial detail, are usually not worth a full quotation, though they can still be worth a short standard reply.

Question 5

What payment terms should I offer a buyer I have not dealt with before?

Accepted Answer

Something that splits the risk. A deposit with the balance against shipping documents is the common first-order structure; a documentary letter of credit suits larger values, provided you check that every document it calls for is one you can actually produce within the dates it sets. Documents against payment gives more protection than documents against acceptance. Reserve open account terms for buyers with a payment history, and where you do want to extend credit to a new buyer, credit insurance is usually cheaper than the discount you would give for cash in advance.

Question 6

What documents will the importer need from me?

Accepted Answer

A commercial invoice, a packing list and the transport document are the routine core. Beyond that it depends on the destination market and can include a certificate of origin or a preferential origin declaration under a trade agreement, an inspection or analysis certificate, a sanitary or phytosanitary certificate, a fumigation certificate, a conformity or test report, or an import licence the buyer obtains themselves. Ask the buyer to list what they need, confirm which of those you can issue, and make sure the description, value, consignee and marks agree across every document.

Question 7

The quantity asked for is far above or below what I can supply. Should I still reply?

Accepted Answer

Yes, and say so plainly. If it is below your minimum, state your minimum and offer the nearest quantity you can serve, with the reason, since a buyer testing the market often has a larger requirement behind the first one. If it is far above your capacity, offer a part of it against a stated delivery schedule rather than declining or overcommitting. Both replies are normal commercial answers. Silence and a quiet overcommitment are the two responses that cost you the relationship.

Question 8

Why do buyers go quiet after the first quotation?

Accepted Answer

Most often because the quotation could not be compared. If the unit, the Incoterm or the validity is missing, the buyer cannot line you up against the others and moves on. The next most common reasons are a lead time that misses their season, a minimum order quantity above what they asked for that was not explained, and a missing certification their market requires. A short follow-up that asks which of those it was, rather than repeating the offer, gets an answer often enough to be worth sending once.

All Categories

List of Coltan Tantalite Ore Buyers in Finland - Directory of Ores and Minerals Import Requirements

Filters

Location

Category

Related categories

Ore Like Tantalite Ore, Tin Ore

Tantalite (Coltan) ores. 1) Tantalite ore min 30% Ta2O5 2) Cassiterite (Tin Ore), min 40% SnO2 Crushed to 0-10 mm Qty: Min one container load or to be.....show more

Company

Buyer contact

Requested on

Tantalite Ore

Type - Tantalite, Wolframite and Cassiterite Quantity: 25 000 to 60 000 mt

Company

Buyer contact

Requested on

Ore Like Tantalite Ore, Tin Ore

Tantalite (Coltan) ores. 1) Tantalite ore min 30% Ta2O5 2) Cassiterite (Tin Ore), min 40% SnO2 Crushed to 0-10 mm Qty: Min one container load or to be.....show more

Company

Buyer contact

Requested on

Ore Like Tantalite Ore, Tin Ore

Tantalite (Coltan) ores. 1) Tantalite ore min 30% Ta2O5 2) Cassiterite (Tin Ore), min 40% SnO2 Crushed to 0-10 mm Qty: Min one container load or to be.....show more

Company

Buyer contact

Requested on

Ores Like Tantalite Ore, Tin Ore,Rhodium Ore, Iridium Ore

PGM containing ores : 1. Rhodium ore, 2.Iridium ore, 3.other PGM ore, Au, Pt, Pdâ€¦ 4. Ex-bonded warehouse, Qty: poly PGM ores min 1 container

Company

Buyer contact

Requested on

Inside Ores and Minerals

Buyers, suppliers and categories

Top Countries for This Category

All Categories

List of Coltan Tantalite Ore Buyers in Finland - Directory of Ores and Minerals Import Requirements

List of Coltan Tantalite Ore wholesale buyers, exporters and Traders Finland.

Filters

Location

Category

Related categories

Ore Like Tantalite Ore, Tin Ore

Tantalite (Coltan) ores. 1) Tantalite ore min 30% Ta2O5 2) Cassiterite (Tin Ore), min 40% SnO2 Crushed to 0-10 mm Qty: Min one container load or to be.....show more

Company

Buyer contact

Requested on

Tantalite Ore

Type - Tantalite, Wolframite and Cassiterite Quantity: 25 000 to 60 000 mt

Company

Buyer contact

Requested on

Ore Like Tantalite Ore, Tin Ore

Tantalite (Coltan) ores. 1) Tantalite ore min 30% Ta2O5 2) Cassiterite (Tin Ore), min 40% SnO2 Crushed to 0-10 mm Qty: Min one container load or to be.....show more

Company

Buyer contact

Requested on

Ore Like Tantalite Ore, Tin Ore

Tantalite (Coltan) ores. 1) Tantalite ore min 30% Ta2O5 2) Cassiterite (Tin Ore), min 40% SnO2 Crushed to 0-10 mm Qty: Min one container load or to be.....show more

Company

Buyer contact

Requested on

Ores Like Tantalite Ore, Tin Ore,Rhodium Ore, Iridium Ore

PGM containing ores : 1. Rhodium ore, 2.Iridium ore, 3.other PGM ore, Au, Pt, Pdâ€¦ 4. Ex-bonded warehouse, Qty: poly PGM ores min 1 container

Company

Buyer contact

Requested on

Inside Ores and Minerals

Buyers, suppliers and categories

Top Countries for This Category