Megatro Anchor Angle Steel Tower

A tower where conductor sections terminate at strain insulators, it is normally built stronger than suspension towers. Mostly used as angle tower when the line changes direction, in power transmission line project, it also named anchor angle tower to change the power transmission directions. For Transmission Tower structures, they can be classified by the way in which they support the line conductors. Suspension structures support the conductor vertically using suspension insulators...Strain structures resist net tension in the conductors and the conductors attach to the structure through strain insulators. Dead-end structures support the full weight of the conductor and also all the tension in it, and also use strain insulators. Where the power transmission line must change direction, then angle towers are used. Structures are classified as angle suspension, angle strain, and angle dead-end. MEGATRO fabricates every structure angle towers by solid steel legs and angle iron cross members & pipes. Structures can reach heights up to 200 meter. MEGATRO is one of the few manufactures who assemble a face of every tower section. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies. After fabrication all angle towers are delivered to the galvanizing facility to be Hot DIP Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers. MEGATRO's anchor angle towers systems can accommodate a variety of cross-arm. MEGATRO also offers a wide variety of accessories and mounts. Availability size: Based on the customer's requirements. Material: Chinese material or as per clients requirement Package: Both parties discuss before delivery Terms of Payment: L/C, T/T Minimum Order Quantity: 10tons Port of Loading: Qingdao Port Lead Time: One month or based on the customer's needs Performance Standard Besides conform to the drawing and design, the materials and fabrication of tower components shall conform to the Chinese Standard or other standard which clients can accept.