12kv distribution steel pole tower

MEGATRO is one of the few manufactures who assemble a face of 12KV distribution poles. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies. MEGATRO 12KV distribution poles systems can accommodate a variety of cross-arm and other accessories. After fabrication 12KV distribution poles are delivered to the galvanizing facility to be Hot DIP Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers. Even we take secondary finish for client again, which as duplex surface treatment. Other information: Availability size: Based on the customer's requirements. Material: Chinese material or as per clients requirement Package: Both parties discuss before delivery Port of Loading: Qingdao Port Lead Time: One month or based on the customer's needs Minimum order: 1 set Fabrication standard: Chinese Standard or other standard which client accepted Steel grades POLE SHAFT: Chinese steel Q235B, which same to ASTM A572 GR50 Other webs, bracing and not stress plate and angle steel: Chinese Q235B, which same to ASTM A36 Plates: Chinese steel Q345B, which same to ASTM A572 GR50 Bolts: Chinese grade 6.8 and 8.8, which similar to ASTM A394 A) Dimension and tolerance for angle are according to GB/T1591-1994, similar to EN 10056-1/2 B) Hot DIP galvanization in accordance with GB/T 13912-2002, which similar to ASTM A 123 C) The welding will be performance in accordance with AWS D1.1 or CWB standard If any special requirement, we can design and discuss with client.