Fitzer - Waste Heat Recovery System

WASTE HEAT RECOVERY is a process of recovering ENERGY from waste process outputs. These are custom-built equipment or systems designed as per the waste heat available and the process heat load. These are custom-built equipment as per the type waste heat available and the process heat requirements. A detailed study of the client's system is required. These systems can be designed to recover waste heat from high-temperature flue gases of furnaces , DG sets, boilers or any other heat source. The waste heat recovery can be designed in shell and tube type or water tube type design based on the operating pressure of the system. Smoke Tube Type Waste Heat Recovery Systems : Package type boilers is an internal furnace Boiler with a three pass, fully wet back & smoke tube type design. The fuel is charged through a charging door to keep the fire going. Package type is designed to provide low cost heating with minimum operational complexity. Due to proper shell or steam drum diameters, steam volume is more & hence better steam quality. Steam Quality is better as Properly Designed Drum Internals are Provided. Provided with accessories like Economizer, Deaerator Tank etc. as per requirement for better performance of the Waste Heat Boiler. Capacity and Working Pressure of the Waste Heat Recovery is considered as per Customers requirement. Heat Exchangers and Waste Heat Recovery Boilers are especially made as per codes like IBR 1950 with its Latest Amendments/TEMA etc.