Your request goes to Shanghai Unite Steel. Follow up with them in Messages on Global Trade Plaza.
FORGING:Heating for forging must be done slowly and uniformly. Soak through at F and reheat as often as necessary, stopping work when the temperature drops below 1700 After forging, cool slowly in lime, mica, dry ashes or furnace. D2 should always be annealed after forging. ANNEALING: Heat slowly to 1550 , hold until entire mass is heated through, and cool slowly in the furnace (40 F per hour) to about 1000 , after which cooling rate may be increased. Suitable precautions must be taken to prevent excessive carburization or decarburization. STRESS RELIEVING: When desirable to relieve the strains of machining, heat slowly to -1250& , allow to equalize, and then cool in still air (Strain Relieving). PREHEAT PRIOR TO HARDENING: Preheat slowly to 1350 and hold at this temperature until material is uniformly heated. HARDENING:After thorough preheating, heat to . Hold the work piece at the hardening temperature until it is completely and uniformly heated. QUENCHING: D2 steel is an air hardening steel and will develop hardness on cooling in still air. To avoid scaling and prevent decarburization of the work piece surface, controlled atmosphere or vacuum furnaces are recommended. If these furnaces are not available, pack hardening, salt baths or wrapping the piece in stainless steel foil will provide some degree of surface protection in the hardening process. Parts should be allowed to cool to 150F, or to where they can be held in the bare hand, and then temper immediately. TEMPERING: The tempering temperature may be varied according to the desired hardness. If maximum hardness is desired, tempering should be in the range , but if a lower hardness is acceptable, tempering at F will give the optimum combination of hardness and toughness. standard AISI, ASTM, BS, DIN, GB, JIS Size 5-1800mm weight and dimensions according to customer
Describe what you need once. Suppliers who deal in it see your requirement as a buy lead and can send you offers.
Shanghai Unite Steel lists D2 tool steel on Global Trade Plaza from China. The listing was added in June 2025.
Brand: Global Trade Plaza. Ask Shanghai Unite Steel for a firm quote and delivery terms before you order.
Shanghai Unite Steel is a B2B supplier based in China, listed on Global Trade Plaza since June 2025. Use Inquire now or Chat with supplier to ask Shanghai Unite Steel for prices, specifications and documents for D2 tool steel.
Ask Shanghai Unite Steel which payment terms they accept for D2 tool steel. Agree the payment terms in writing with the supplier before you pay.
Placing an order for D2 tool steel with Shanghai Unite Steel is quick and straightforward on Global Trade Plaza, a leading B2B marketplace for global buyers and suppliers. You can:
When purchasing D2 tool steel from a B2B marketplace in 2025, focus on the following critical factors:
Comparing prices and communicating directly with Shanghai Unite Steel can help ensure value for money and better sourcing decisions.
Global Trade Plaza is home to B2B buyers, wholesalers, distributors, and importers of D2 tool steel across industries and countries. To discover the most active and high-value buyers:
Shanghai Unite Steel, a B2B supplier from China, dispatches D2 tool steel primarily through the port at China. Packaging types (e.g., bulk, custom, eco-friendly) and estimated pricing may vary based on order volume and destination. To get detailed logistics and pricing information, use Get a quote or Chat with supplier, or Sign Up for direct supplier interaction.