CM Rubber Vulcanizing Agent

CAS; 51988-14-8 Usage: CPE, CM Rubber Vulcanizing Agent Vulcanizing agent TDDS Appearance The finished product is light yellow powder. Packing: 25kg/cardboard drum Composition of thiadiazole thiadiazole ester derivatives Content (assy)%>96 Detail% > 99 (pass rate of 320 meshes) Melting Point (m, p)% 165-168 C Moisture (w, c) is less than 0.30 Ash (%) less than 0.30 DMF density 1.46 Physical properties: insoluble in methanol, ethanol, water, slightly soluble in acetone Foreign similar product brands: Rhenogran TDD in Germany; ACTOR-ECHO.A in USA Shelf life: 12 months sealed at room temperature Product description: TDDS is a vulcanizing crosslinker specially designed for halogenated synthetic rubber such as chlorinated polyethylene rubber (CM) and chlorohydrin rubber (ECO) chloroprene rubber (CR) chlorosulfonated polyethylene rubber (CSR). TDDS is a derivative of 2,5-dimercapto-1,3,4-thiadiazole ester. TDDS is a derivative of thiadiazole ester. It can be used as a new vulcanization crosslinker for halogenated polymers such as chlorinated polyethylene rubber (CPE), polyvinyl chloride (PVC) and chlorohydrin rubber (ECO), chlorosulfonated polyethylene rubber (CSM), chlorinated rubber, chlorobutadiene rubber (EVA). TDDS is especially suitable for vulcanization and crosslinking of CPE. It is a highly effective and high performance vulcanizing agent for chlorinated polyethylene with NC or BF. Advantages of TDD vulcanization system: 1. TDDS vulcanization system is suitable for any vulcanization methods, such as moulding, continuous vulcanization, tank type, microwave type, etc. The vulcanization process will not be oxidized by air. It is suitable for Moldless vulcanization in vulcanization tank with low vulcanization temperature. Also suitable for injection moulding can be vulcanized in vulcanizer. 2. The curing speed is fast and the positive curing time is short. 3. Safe operation, no pollution in the production process, no irritating odor, no frost, no scorch. 4. The physical properties of vulcanizates are as good as those of peroxide systems, and they are ageing-resistant. Excellent heat resistance, small compression permanent deformation, especially good tear resistance. 5. The product has good appearance, no frost spraying, no burning and no irritating odor. Product applications: 1. The recommended dosage is 2.0-2.5 TDDS and 1.5 BF (NC) for cable sheath and rubber products such as inner and outer rubber and conveyor belts. 2. A small amount of insoluble sulfur can be used in braided rubber pipes with copper-plated steel wires to improve their vulcanization and adhesion to steel wires. 3. Suitable for high temperature and rapid vulcanization, and also for steam tank type vulcanization: 4 kg/cm2 steam pressure (151 C) vulcanization tank. Suggestion of vulcanization time is 40 minutes.