
Choosing between prilled and granular urea shapes every downstream decision from spreader calibration and blend compatibility to terminal handling costs and import compliance. The two forms share the same 46 percent nitrogen guarantee but diverge sharply in particle size, crush strength, and dust behavior, which determines whether a cargo survives multiple transshipment points or arrives as fines. This guide aligns the export specifications that appear on certificates of analysis, explains how prilling towers and granulation drums create those physical differences, and maps the agronomic and industrial requirements that drive buyer preferences across Brazil, the United States, the European Union, and the diesel exhaust fluid market.
You will learn which ISO test methods validate each parameter, why granular urea commands a premium for bulk blending and long-distance trucking, how critical relative humidity and anti-caking coatings affect storage through humid seasons, and what impurity thresholds ISO 22241 sets for AUS 32 production. The article also covers the documentation exporters must provide for Brazilian MAPA registration, US federal chemical regulation, and EU chemical registration, so you can match product form to destination market without customs delays or contract disputes.
Buyers need a rapid reference to match product form with application equipment and import regulations. The table below aligns the critical specifications that appear on certificates of analysis and sales contracts.
| Parameter | Prilled Urea | Granular Urea | Typical Test Method | Contractual Relevance |
|---|---|---|---|---|
| Nitrogen Content (wt%) | 46.0 min | 46.0 min | ISO 5315 / AOAC 920.03 | Basis for nutrient value payment |
| Particle Size (mm) | 1.0, 2.8 (90% passing) | 2.0, 4.75 (90% passing) | ISO 8397 | Determines spreading width and blend compatibility |
| Crush Strength (kg/particle) | 0.7, 1.2 avg | 2.0, 3.5 avg | ISO 8396 / IFDC method | Predicts dust generation during bulk handling |
| Biuret (wt%) | 1.0 max (standard) / 0.3 max (low biuret) | 1.0 max (standard) / 0.3 max (low biuret) | ISO 8398 | Critical for foliar and fertigation use |
| Moisture (wt%) | 0.5 max | 0.5 max | ISO 2753 | Affects caking risk and weight settlement |
| Free Ammonia (mg/kg) | 160 max | 160 max | ISO 22241-2 (DEF grade) | Must meet AUS 32 purity for DEF production |
| Bulk Density (kg/m³) | 720, 760 | 740, 780 | ISO 5314 | Calculates vessel stowage factor and truck payload |
Prilled urea typically shows a narrower size distribution centered below 3 mm while granular urea delivers a median diameter above 3 mm giving it a wider broadcast spread pattern. The crush strength gap explains why granular product survives multiple transshipment points with less fines generation. Biuret limits are identical per grade but low-biuret granular commands a higher premium because fewer producers run the additional purification step. Moisture and free ammonia caps are harmonized across forms to protect both agronomic safety and downstream industrial specs.
Both prilled and granular urea guarantee a minimum 46 percent nitrogen on a dry weight basis. This figure is the commercial baseline for pricing in CFR and FOB contracts worldwide. Purity deviations above 46 percent are rare because the synthesis loop thermodynamics fix the stoichiometry; any shortfall usually signals excess moisture or adulteration. Buyers should verify the certificate of analysis references ISO 5315 or an equivalent gravimetric method rather than a rapid NIR scan alone.
Prilled urea particles are spherical and typically range from 1.0 to 2.8 mm with 90 percent passing the 2.8 mm sieve. Granular urea particles are irregular and larger ranging from 2.0 to 4.75 mm with 90 percent retained between those screens. The crush strength of prills averages 0.7 to 1.2 kg per particle while granules withstand 2.0 to 3.5 kg. This mechanical difference dictates that prilled urea generates more dust during pneumatic conveying and requires gentler handling at import terminals. Granular urea maintains integrity through grab unloading and belt transfers making it preferred for bulk blends that undergo multiple load-out cycles.
Standard grade urea allows up to 1.0 percent biuret while low-biuret grades cap it at 0.3 percent for sensitive crops and foliar applications. Moisture is limited to 0.5 percent maximum in both forms to suppress caking during ocean voyages. Free ammonia must not exceed 160 mg/kg especially when the cargo is destined for diesel exhaust fluid production under ISO 22241. Exporters targeting the DEF market should request a specific low-ammonia certificate from the plant laboratory because standard agricultural certificates may not report this parameter.
Particle morphology drives every downstream handling decision from silo design to spreader calibration. Chinese producers received urea export quotas totaling 1.5-1.6 million tons for June-August according to UkrAgroConsult (June-August 2026), a volume that will test port infrastructure and highlight the handling differences between forms.
Prilled urea forms near-perfect spheres in the prilling tower which roll past each other yielding an angle of repose near 27 degrees and excellent flow through hoppers. Granular urea exits the drum with an irregular, roughly polyhedral shape creating an angle of repose between 30 and 32 degrees and higher inter-particle friction. The spherical geometry of prills reduces dust generation at the point of formation but their lower crush strength means fines accumulate rapidly during pneumatic unloading. Granules produce more dust at the granulator discharge but resist attrition better during marine transport. Buyers operating pneumatic conveying systems at import terminals should specify a strict maximum fines fraction for prilled cargoes to limit dust explosion risk and product loss.
Crush strength measured as the force to fracture a single particle determines how many handling cycles a cargo survives before excessive fines degrade blend uniformity. Prilled urea typically fractures at 0.7 to 1.2 kg per particle which limits it to direct application or single-pass blending. Granular urea withstands 2.0 to 3.5 kg per particle allowing it to endure grab ship unloading, belt conveying, rail dumping, and final truck load-out without significant size degradation. Importers blending urea with MAP, DAP, or potash should require granular urea with a minimum 2.5 kg average crush strength to maintain a consistent size match across the blend components. Terminal operators can request the IFDC drum attrition test report as part of pre-shipment inspection to verify this parameter.
Urea exhibits a critical relative humidity of approximately 75 percent at 30 degrees Celsius above which it absorbs moisture from the air and forms liquid bridges between particles that solidify into cakes. Prilled urea with its smoother surface and lower specific surface area resists initial moisture uptake slightly better than granular urea. However once caking initiates the spherical prills create more uniform contact points leading to harder lumps that are difficult to break without generating fines. Granular urea cakes into weaker agglomerates that crumble more easily during reclaim. Both forms benefit from anti-caking coatings typically applied at 0.3 to 0.5 kg per ton of formaldehyde-based or polymer-based conditioners. Buyers storing urea through humid seasons should specify coated product and verify coating uniformity through the dye absorption test described in ISO 11543.
Prilled urea is made by spraying molten urea from the top of a tall prilling tower. Gravity pulls the droplets downward while counter-current air cools and solidifies them into spherical particles before they reach the bottom conveyor. Particle size is controlled mainly by nozzle orifice, melt temperature, and air flow rate. The process is continuous and relatively simple, with low recycle rates because off-spec prills can be returned to the melt tank. Energy demand is modest compared with granulation, though the tower itself is a significant capital item. A practical caveat is that prills are softer and more prone to abrasion during conveying, which generates fines that buyers may reject at discharge.
Granular urea forms inside a rotary drum where urea melt is sprayed onto seed particles. Successive layers build up as the drum tumbles, and undersized or oversized material is crushed and returned to the drum as recycle. Recycle ratios are typically high, which increases residence time and energy consumption per ton. Binders or conditioners may be added to improve crush strength and reduce dust. The drum requires more mechanical equipment and maintenance than a prilling tower, but it produces harder, more uniform granules that withstand bulk handling better. Buyers seeking product for blending or long-distance trucking often specify granular urea for this mechanical advantage.
Both processes emit ammonia and urea dust, though the sources differ. Prilling towers release fine particulates from the cooling air stream, while granulation drums generate dust from tumbling and recycle handling. Scrubbers and cyclones are commonly installed to capture particulates before discharge. Ammonia recovery systems return absorbed ammonia to the urea synthesis loop. Operators must comply with local air-quality permits that set limits on particulate matter and ammonia concentration at the stack. Buyers importing urea should ask for the producer's environmental compliance certificate as part of pre-shipment documentation, particularly when sourcing from jurisdictions with strict industrial emissions rules.
Prilled urea dissolves faster than granular urea because each prill presents a smooth spherical surface with a high surface-area-to-mass ratio once it contacts moisture. Granular urea has a rougher, more porous structure that slows initial water penetration, although the larger particle mass means total dissolution takes longer in dry soil. In irrigated systems or fertigation, prilled urea moves quickly into solution, which suits frequent low-dose applications. In rain-fed systems, granular urea persists longer on the surface before dissolving, which can be an advantage if rainfall is delayed. The practical implication is that prilled urea is better suited to split applications through irrigation water, while granular urea fits single broadcast applications where immediate incorporation is not possible.
Surface-applied urea loses nitrogen through ammonia volatilization when urease enzyme converts urea to ammonium carbonate near the soil surface. Because prilled urea dissolves rapidly, it can create a localized high-pH zone that increases volatilization risk if left on residue-covered no-till fields. Granular urea dissolves more slowly, which may slightly reduce the immediate volatilization spike, but both forms suffer significant loss without incorporation or rainfall within a few days. Urease inhibitors can be coated onto either form to slow hydrolysis. For no-till operations, the form matters less than placement and timing; banding either product below the residue layer or applying before expected rain is the most reliable way to protect nitrogen.
Granular urea spreads more uniformly than prilled urea because its higher density and spherical but heavier particles maintain ballistic consistency across the full bout width of a spinner spreader. Prilled urea is lighter and more easily affected by wind, which causes the outer edges of the spread pattern to taper and increases the coefficient of variation in application rate. For aerial spreading, granular urea is preferred because it carries farther from the aircraft and produces a more even swath. Operators should calibrate spreaders separately for each product and check the pattern with tray tests. A mismatch in particle size between urea and other blend components can also cause segregation in the hopper, so terminal operators often specify similar size guides for prilled and granular material in custom blends.
Automotive-grade urea solution must meet ISO 22241 specifications to protect selective catalytic reduction systems from catalyst poisoning and injector blockage. Biuret forms during urea synthesis when two urea molecules condense, and it must stay below 0.3 percent by mass in AUS 32 because higher concentrations can leave deposits on SCR catalysts. Aldehydes, measured as acetaldehyde equivalents, are limited to 5 milligrams per kilogram because they contribute to deposit formation in the exhaust system. Urea concentration itself must fall between 31.8 percent and 33.2 percent by weight, with density controlled around 1.087 to 1.093 grams per cubic centimeter at 20 degrees Celsius. Buyers purchasing technical-grade urea for DEF production should require a certificate of analysis showing these impurity limits before accepting bulk shipments.
ISO 22241 restricts trace metals because even small amounts can accelerate catalyst degradation in diesel exhaust after-treatment systems. Calcium, chromium, copper, iron, magnesium, nickel, zinc, and aluminum each face tight thresholds, typically at or below 0.5 milligrams per kilogram for most metals. Iron and copper are especially sensitive because they can promote unwanted chemical reactions inside the SCR catalyst. Aluminum is limited to 0.5 milligrams per kilogram to prevent ash-related fouling. Exporters supplying urea for industrial or DEF use must verify that prill or granular feedstock does not pick up metals from corroded storage tanks, carbon steel conveying equipment, or contaminated blending lines. Prilled urea often moves through taller prilling towers with more residence time, while granular urea spends longer in drums, so each form can carry different metal exposure risks depending on plant materials.
Insoluble matter is capped at 20 milligrams per kilogram in ISO 22241-grade material because undissolved particles can clog DEF filters and dosing injectors. Phosphate is limited to 0.5 milligrams per kilogram to prevent phosphate-based deposits on SCR catalysts. Control strategies include using demineralized water for dissolution, filtering urea solution through sub-micron cartridges, and storing finished DEF in dedicated polyethylene or stainless-steel tanks to avoid corrosion products. For solid urea destined for DEF manufacture, buyers should specify low-dust grades with tight particle-size distributions so the material dissolves fully without leaving screen residue. A comparison of key impurity limits appears below.
| Impurity | ISO 22241 Limit | Unit | Risk if Exceeded | Typical Control Method |
|---|---|---|---|---|
| Biuret | 0.3 | percent by mass | SCR catalyst deposits | Controlled synthesis temperature |
| Aldehydes | 5 | milligrams per kilogram | Exhaust system deposits | Raw material purification |
| Insoluble matter | 20 | milligrams per kilogram | Filter and injector blockage | Sub-micron filtration |
| Phosphate | 0.5 | milligrams per kilogram | Catalyst fouling | Demineralized water |
| Total metals | 0.5 each | milligrams per kilogram | Catalyst degradation | Corrosion-resistant equipment |
These limits apply to the urea feedstock as well as the finished DEF solution, so exporters should obtain batch-specific analysis rather than relying on general product data sheets. Buyers can verify supplier credentials through B2B marketplaces such as Global Trade Plaza, where technical-grade urea listings often include specification sheets and compliance documentation.
Brazil regulates fertilizer imports through its agriculture ministry, which sets product registration, labeling, and quality standards for urea entering the country. Importers must provide documentation proving the product meets national fertilizer specifications, including nutrient content, moisture limits, and particle-size declarations. Granular urea is commonly preferred for broadacre application because its density supports consistent spreading, while prilled urea may be accepted for specialty or blended products if it meets the same analytical tolerances. Labels must state nitrogen content in the official language, and shipments may be subject to inspection at port before release. Exporters should confirm current registration requirements with Brazilian authorities before arranging shipment, as protocols can change with regulatory updates.
In the United States, fertilizer products are regulated under federal environmental statutes that cover chemical manufacturing, import, and use, while the European Union applies chemical registration requirements to substances placed on its market. Urea imported into these regions must be accompanied by safety data sheets and, where applicable, registration dossiers that identify the substance, its hazards, and safe handling instructions. Granular urea typically moves in bulk vessels or containerized bags, and importers must retain customs classification records under the correct HS code for fertilizers. Compliance responsibilities fall on the importer of record, so exporters should provide complete technical documentation and notify buyers of any classification or labeling obligations in the destination market.
| Market | Governing Standard | Moisture Limit | Biuret Limit | Particle Size Requirement |
|---|---|---|---|---|
| Brazil | National fertilizer standard | 1.0 percent maximum | Not specified | Declared on label |
| United States | Federal chemical regulation | 1.0 percent maximum | Not specified | Not specified |
| European Union | Chemical registration regulation | 1.0 percent maximum | Not specified | Not specified |
China's urea exports reached 4.89 million tons in 2025, the highest since 2021, according to UkrAgroConsult. This volume illustrates how major origin countries can shift global supply balances quickly, which affects specification availability and pricing for both prilled and granular grades. Buyers should treat destination-market rules as dynamic and confirm the latest import protocols with customs brokers or trade advisers before finalizing contracts.
Cross-border urea shipments require a precise document package to satisfy customs, port authorities, and letter-of-credit terms. Missing or mismatched paperwork causes demurrage, rejected cargoes, and payment delays. The checklist below aligns with standard export practice for nitrogen fertilizers moving under HS code 3102.10.
The Certificate of Analysis is the primary commercial document linking cargo quality to the sales contract. Every parameter on the CoA, total nitrogen content, moisture, biuret, particle size distribution, and free ammonia, must fall within the contractual tolerances before the vessel loads. Buyers typically require the CoA to be issued by an independent superintendent company such as SGS, Intertek, or Cotecna, with the sampling method referenced (for example ISO 11556 for static sampling). Any deviation triggers a claim negotiation or price adjustment under the contract quality clause. Exporters should retain the laboratory raw data for at least two years in case of retrospective disputes.
Urea enters international trade under HS code 3102.10, which covers urea whether or not in aqueous solution. Correct classification determines the applied Most Favored Nation duty, any preferential rate under a free trade agreement, and eligibility for agricultural input exemptions in the destination market. Misclassification, for instance declaring granular urea as "chemical fertilizer not elsewhere specified", exposes the importer to penalties and the exporter to reputational risk. The commercial invoice must state the six-digit heading and the eight-digit national subdivision used by the importing customs authority. Exporters should confirm the current tariff treatment with the buyer's customs broker before issuing the final invoice set.
Although urea is a mineral product, many importing countries require a phytosanitary certificate or a fumigation certificate when the cargo ships in bulk or in bags on wooden pallets. The requirement targets wood packaging material regulated under ISPM 15 rather than the fertilizer itself. Brazil, Australia, and several Southeast Asian markets routinely request a treatment certificate showing methyl bromide fumigation or heat treatment of dunnage and pallets. The certificate must reference the IPPC mark on the wood. For bulk shipments, a cleanliness certificate for the holds is often substituted. Exporters should verify the specific plant protection import permit conditions with the buyer's local agent before arranging hold preparation.
Physical form dictates how urea moves through ports, warehouses, and blending plants. Prilled and granular grades behave differently in bulk storage, vessel loading, and NPK blending lines. Understanding these differences prevents segregation, caking, and dust complaints that erode margin and customer relationships.
Stowage factor determines how many metric tons fit in a given hold volume and drives freight cost per tonne. Granular urea typically stows at 1.30 to 1.35 cubic metres per tonne while prilled urea ranges from 1.40 to 1.50 cubic metres per tonne due to lower bulk density. Charter parties should specify the grade so the shipowner can optimize hold loading sequences and avoid deadweight or cubic constraints. Port terminals with high-throughput ship loaders often prefer granular urea because its free-flowing characteristics reduce chute blockages and allow higher nominal loading rates. Chinese producers received urea export quotas totaling 1.5-1.6 million tons for June-August 2026 according to UkrAgroConsult.
Segregation occurs when particles of different size, density, or shape separate during handling. Granular urea (2 to 4 mm) blends compatibly with granular DAP (2 to 4 mm) and granular MOP (2 to 4 mm) because the size envelopes overlap. Prilled urea (1 to 2.8 mm) paired with the same granular partners creates a high segregation risk: the finer prills concentrate at the center of a stockpile while coarse granules roll to the perimeter. This effect worsens with repeated conveyor transfers. Blenders mitigate segregation by matching particle size distributions, using paddle mixers instead of ribbon blenders, and limiting drop heights. Ammonium sulfate (crystalline or granular) presents an additional compatibility challenge due to its hygroscopicity; blending trials are recommended before commercial runs.
Anti-caking coatings reduce moisture uptake and inter-particle crystal bridging during storage. Common agents include formaldehyde-based conditioners, amine salts, and polymer emulsions applied at 0.1 to 0.3 kg per tonne during cooling. Granular urea accepts coating more uniformly because its spherical surface area per tonne is lower and more consistent. Prilled urea's higher specific surface area demands higher coating dosage for equivalent protection, increasing cost. Dust suppression oils (typically 0.2 to 0.5 kg per tonne) are often co-applied. Coating effectiveness is measured by the caking test (for example ASTM D7446) and dust generation index. Buyers should specify the approved coating type in the contract because some markets restrict formaldehyde residues in agricultural soils.
| Parameter | Granular Urea | Prilled Urea | Blending Partner Compatibility | Typical Coating Dosage (kg/t) | Stowage Factor (m3/t) |
|---|---|---|---|---|---|
| Particle Size Range | 2.0, 4.0 mm | 1.0, 2.8 mm | Match particle size distributions | 0.1, 0.3 | 1.30, 1.35 |
| Angle of Repose | 30, 32 degrees | 28, 30 degrees | Limit drop height < 3 m | Dust oil 0.2, 0.5 | , |
| Segregation Risk | Low with granular partners | High with granular partners | Use paddle mixer | , | , |
| Hold Cleaning Standard | Grain clean | Grain clean | , | , | , |
The table summarizes the key logistics and blending parameters. Granular urea's higher bulk density translates into a lower stowage factor, allowing more tonnes per cubic metre of hold space. Its particle size envelope aligns with standard granular DAP and MOP, minimizing segregation in NPK blends. Prilled urea requires tighter controls on coating dosage, drop height, and blending sequence to maintain product integrity. Both grades require grain-clean holds, but granular urea's flow characteristics generally yield faster loading and discharge cycles at modern terminals.
Middle Eastern producers dominate global urea export volumes with Qatar, Saudi Arabia, Egypt and Algeria operating large-scale gas-advantaged plants that ship granular and prilled grades year-round. Russia remains a critical swing supplier to Europe and Asia, adjusting output between granular and prilled based on seasonal demand and logistics constraints. China set a minimum export price of $660/ton FOB for bulk urea according to UkrAgroConsult, creating a price floor that influences NOLA and Black Sea benchmarks during periods of tight supply. North African origins typically offer shorter transit times to Brazil and Southern Europe while Middle Eastern cargoes serve India, Australia and the US Gulf more efficiently.
Brazil drives the largest single-country import demand with peak purchasing windows from January through March for the safrinha corn crop and again in September for the summer soybean planting. US Gulf imports surge in spring for corn belt application while European demand concentrates in late winter ahead of cereal top-dressing. Australian buyers procure granular urea predominantly between February and May for winter wheat and canola establishment. Southeast Asian markets including Thailand and Vietnam maintain steadier year-round buying for rice paddy cycles. These staggered seasonal peaks allow exporters to optimize vessel scheduling and grade allocation across the calendar year.
FOB values at origin reflect plant-gate production costs plus inland logistics to load port while CFR and CIF levels add ocean freight, insurance and port charges that vary significantly by route.
| Trade Lane | Typical Vessel Class | Freight Range USD/t | Transit Days | Key Seasonal Window |
|---|---|---|---|---|
| Arabian Gulf to Brazil | Panamax | 18, 25 | 22, 28 | Jan, Mar / Sep, Oct |
| Black Sea to Brazil | Panamax | 12, 18 | 18, 24 | Jan, Mar / Sep, Oct |
| Egypt/Algeria to US Gulf | Supramax | 15, 22 | 14, 18 | Mar, May |
| Middle East to Australia | Panamax | 16, 22 | 16, 22 | Feb, May |
| Russia to EU Med | Handysize/Supramax | 8, 14 | 6, 10 | Feb, Apr |
The table above maps the five highest-volume urea trade lanes by vessel class, freight range and transit time. Russia to EU Mediterranean benefits from short transit and lower fuel exposure making it the most cost-efficient corridor for granular urea into Southern Europe. Buyers should align purchase timing with these seasonal windows to lock freight before peak demand inflates charter rates.
Trade Fertilizers on Global Trade Plaza: fertilizers on Global Trade Plaza, fertilizers suppliers and exporters, fertilizers buyers and importers, urea 46 prilled granular, agriculture fertilizers pesticides on Global Trade Plaza, green coast fertilizer company gcfc (supplier profile), urea 46 nitrogen fertilizer, urea fertilizer 46 prilled granular, high quality diammonium phosphate dap fertilizer, rock phosphate.
The final verdict is that granular urea dominates broad-acre dry blending and high-capacity spreading where particle size matching with DAP and MOP prevents segregation and bout widths exceed thirty meters. Prilled urea remains the technical choice for flooded rice systems aerial top-dressing and industrial feedstock such as DEF production and urea-formaldehyde resins where rapid dissolution and strict biuret or iron limits are non-negotiable. Procurement teams should specify granular for NPK lines and temperate cereal belts and prilled for tropical paddy belts and chemical plants. Always confirm the certificate of analysis against the destination contract before loading because a single off-spec parameter such as biuret above 0.9 percent or moisture above 0.5 percent can trigger rejection at discharge port.
The higher price reflects the additional energy and equipment required for drum granulation and the superior handling characteristics that reduce losses during bulk transport.
Standard export granular urea guarantees 46 percent minimum nitrogen, particle size 2.0 to 4.75 mm with 90 percent retention, crush strength 2.0 to 3.5 kg per particle, moisture 0.5 percent maximum, and biuret 1.0 percent maximum. These parameters appear on the certificate of analysis and are verified against ISO 5315, ISO 8397, and ISO 8396 methods.
Importers need a commercial invoice, packing list, bill of lading, certificate of analysis from an accredited lab, certificate of origin, and a phytosanitary or fumigation certificate where the destination country mandates it. A letter of credit will typically require presentation of the certificate of weight and quality issued at load port.
Granular urea is preferred for NPK blending because its 2.0 to 4.75 mm particle size matches common MAP, DAP, and potash fractions and its crush strength above 2.5 kg resists attrition during mixing and bagging. Prilled urea at 1.0 to 2.8 mm tends to segregate and generates fines that degrade blend uniformity.
Granular urea is better for aerial application because its higher bulk density and larger mass carry farther from the aircraft and produce a more even swath pattern. Prilled urea is lighter and more susceptible to wind drift which increases the coefficient of variation across the spread width.
The Harmonized System code for urea fertilizer is 3102.10 covering urea whether or not in aqueous solution. This six-digit heading is used globally; importing countries may extend it to eight or ten digits for statistical breakdowns such as coated versus uncoated product.
Biuret limits are identical for both forms at 1.0 percent maximum for standard grade and 0.3 percent maximum for low-biuret grade. The difference lies in availability: fewer granulation plants operate the additional purification step so low-biuret granular urea carries a larger premium and longer lead times.
ISO 22241 requires urea for diesel exhaust fluid to meet 46 percent minimum nitrogen, biuret 0.3 percent maximum, free ammonia 160 mg/kg maximum, aldehydes 5 mg/kg maximum, and insoluble matter 20 mg/kg maximum. The certificate must reference ISO 22241-2 test methods and is distinct from standard agricultural grade documentation.
India mandates neem-coated urea for all domestically sold and imported agricultural urea under its fertilizer control order. No other major importing country currently imposes a mandatory neem-coating requirement although some buyers request coated product voluntarily for improved nitrogen use efficiency.
Granular urea typically ships at a bulk density of 740 to 780 kg per cubic meter. This value determines the vessel stowage factor and maximum truck payload and is verified using ISO 5314 during load port inspection.
Moisture above 0.5 percent significantly increases caking risk because urea absorbs ambient humidity above its critical relative humidity of roughly 75 percent at 30 degrees Celsius forming liquid bridges that solidify into lumps. Prilled urea cakes into harder lumps while granular urea forms weaker agglomerates that crumble more easily on discharge.
Major granular urea export origins include China, Russia, Qatar, Saudi Arabia, Iran, Egypt, Algeria, and the United States. These countries operate large-scale granulation drums and have established deep-water load ports capable of handling Panamax and Capesize vessels.