Your request goes to Famaga. Follow up with them in Messages on Global Trade Plaza.
Z-SG is a strain gauge signal converter. Measurements taken using the 6-wires or 4-wires technique are available through Modbus-RTU serial protocol or the analog output. Sensitivity from 1 to 64mV/V, settable by DIP-switch for integer values, via software for real/integer values by connecting to the device via the microUSB port on the front panel. Stable weight indication via Modbus register/digital output. Remote writing of the tare in volatile and/or non-volatile memory by digital input/Modbus register/Modbus commands. Z-PC-DINAL2-17.5, Z-PC-DIN2-17.5, and Z-PC-DIN8-17.5 are mandatory accessories for ModBUS configurations. TECHNICAL DATA POWER SUPPLY10..40 Vdc, 19..28 Vac (@50..60 Hz) POWER CONSUMPTION2,5 W INSULATION1.500 Vac a 3 vie ACCURACY CLASS0,01% STATUS LEDPower supply Error Tx Data Rx Data CONNECTIONSRemovable screw terminals for conductors up to 2.5 mm² MicroUSB port on front panel INTERFACESRS485 2 wires, speed up to 115.200 bps SUPPORTED PROTOCOLSModBUS RTU slave INPUT CHANNELS1 analog channel for reading (and power supply) up to 4 (350 Ω) or 8 (1,000 Ω) strain gauge load cells, 4 or 6-wire connection, equivalent impedance 87 Ω 1DI tare calibration or weight threshold OUTPUT CHANNELS1 analog retransmission channel of the net weight in current (0...20, 4...20 mA) or in voltage (0..5, 0..10 V); 1DO tare calibration or weight threshold MEASUREMENT / DIAGNOSTICSSensitivity from 1 to 64 mV/V RESOLUTION24 bit THERMAL DRIFT25 ppm/K DATA EEPROM for configuration parameters, retention time 40 years PROGRAMMINGPlug&Play configurator (EASY SETUP) System software (Z-NET4) DIP-switch
Describe what you need once. Suppliers who deal in it see your requirement as a buy lead and can send you offers.
The Z-sg Seneca Strain Gauge Signal Converter is a strain gauge signal converter. Measurements taken using the 6-wires or 4-wires technique are available through Modbus-RTU serial protocol or the analog output. Sensitivity from 1 to 64mV/V is settable by DIP-switch for integer values or via software for real/integer values by connecting to the device via the microUSB port on the front panel. Stable weight indication is provided via Modbus register/digital output. Z-PC-DINAL2-17.5, Z-PC-DIN2-17.5, and Z-PC-DIN8-17.5 are mandatory accessories for ModBUS configurations.
The seller has not added a specification yet; ask for the data sheet or test certificate. Ask Famaga for a firm quote and delivery terms before you order.
Famaga is a B2B supplier based in United States, listed on Global Trade Plaza since October 2026. Use Inquire now or Chat with supplier to ask Famaga for prices, specifications and documents for Z-sg Seneca Strain Gauge Signal Converter.
Ask Famaga which payment terms they accept for Z-sg Seneca Strain Gauge Signal Converter. Agree the payment terms in writing with the supplier before you pay.
Placing an order for Z-sg Seneca Strain Gauge Signal Converter with Famaga is quick and straightforward on Global Trade Plaza, a leading B2B marketplace for global buyers and suppliers. You can:
When purchasing Z-sg Seneca Strain Gauge Signal Converter from a B2B marketplace in 2025, focus on the following critical factors:
Comparing prices and communicating directly with Famaga can help ensure value for money and better sourcing decisions.
Global Trade Plaza is home to B2B buyers, wholesalers, distributors, and importers of Z-sg Seneca Strain Gauge Signal Converter across industries and countries. To discover the most active and high-value buyers:
Famaga, a B2B supplier from United States, dispatches Z-sg Seneca Strain Gauge Signal Converter primarily through the port at United States. Packaging types (e.g., bulk, custom, eco-friendly) and estimated pricing may vary based on order volume and destination. To get detailed logistics and pricing information, use Get a quote or Chat with supplier, or Sign Up for direct supplier interaction.