Your request goes to Qingdao Ruipute Heat Exchange Equipment Manufacturing Co., Ltd.. Follow up with them in Messages on Global Trade Plaza.
Product introduction The plate condenser consists of plates that are welded together in pairs to form a so-called plate set. The concept of a plate set leads to two different types of channels: a weld channel for condensing steam and a gasket seal channel for cooling water. This type of plate is specially designed for optimum condensation. It has an asymmetrical arrangement with a large gap on the steam side and a small gap on the cooling water side. This makes it possible to maintain a very low pressure drop at the steam end while maintaining a certain speed and turbulence on the cooling water side. This maximizes heat transfer efficiency and minimizes fouling. Plate condensers are specially developed for condensing steam under low pressure or vacuum conditions in evaporation and distillation systems. It can meet a variety of specific applications and capabilities requirements. The steam inlet fitting is large and the two condensate outlets are small. The cooling water fitting is a medium size and is located in the center of the plate. Maximum heat transfer area: 500m2/set; Maximum design pressure:16bar Maximum temperature:200 celsius degree; Nozzle diameter:DN50~DN700 Plate thickness:0.5mm-1.2mm; Gasket material:NBR, EPDM, HNBR, HT-NBR, HEPDM, CR, VITON/FKM Fixed and movable plate material: Carbon Steel, Stainless Steel, and others on request. Plate material:AISI304, AISI316, AISI316L, Titanium, Ti-Pa,Hastelloy C276,254SMO,Nickel, AISI904L. Features Plate condenser Lower cost Due to the high heat transfer efficiency, this means less heat exchange area and higher cost efficiency than conventional shell and tube type, especially when stainless steel or titanium is required. The compact design also saves space, thus reducing transportation and installation costs. Plate condenser Less fouling Due to the high strength turbulence created by the specially designed corrugated sheets, there is less fouling on the cooling water side than the shell and tube condenser. Plate condenser Easy to clean The cooling water side is easy to clean, whether in the way of mechanical or chemical. Plate condenser Easy to expand Just add an extra "plate group" in the existing frame. Plate condenser Complete counterflow A greater degree of subcooling of non-condensable gases can be achieved compared to shell and tube equipment. Therefore, the load of the vacuum pump will be reduced. Range of application Alumina, food industry, sugar industry, beverage industry, industrial wastewater, etc.
Basic member
Qingdao Ruipute Heat Exchange Equipment Manufacturing Co., Ltd.
(0.0)
Business type - Contact Seller
Describe what you need once. Suppliers who deal in it see your requirement as a buy lead and can send you offers.
The Plate Condenser is a heat exchanger where plates are welded in pairs to form a plate set, creating a weld channel for condensing steam and a gasket seal channel for cooling water. It has an asymmetrical design with a large gap on the steam side and a small gap on the cooling water side to maintain low pressure drop at the steam end while ensuring turbulence on the cooling water side. The steam inlet fitting is large, condensate outlets are small, and the cooling water fitting is medium-sized and centered. Maximum heat transfer area is 500m2/set, maximum design pressure is 16bar, and maximum temperature is 200 celsius degree. Nozzle diameter ranges from DN50 to DN700, and plate thickness is between 0.5mm and 1.2mm. Gasket material options include NBR, EPDM, HNBR, HT-NBR, HEPDM, CR, and VITON/FKM. Fixed and movable plate materials are Carbon Steel, Stainless Steel, and others on request, while plate materials include AISI304, AISI316, AISI316L, Titanium, Ti-Pa, Hastelloy C276, 254SMO, Nickel, and AISI904L.
The seller has not added a specification yet; ask for the data sheet or test certificate. Ask Qingdao Ruipute Heat Exchange Equipment Manufacturing Co., Ltd. for a firm quote and delivery terms before you order.
Qingdao Ruipute Heat Exchange Equipment Manufacturing Co., Ltd. is a B2B supplier based in China, listed on Global Trade Plaza since October 2026. Use Inquire now or Chat with supplier to ask Qingdao Ruipute Heat Exchange Equipment Manufacturing Co., Ltd. for prices, specifications and documents for The Plate Condenser.
Ask Qingdao Ruipute Heat Exchange Equipment Manufacturing Co., Ltd. which payment terms they accept for The Plate Condenser. Agree the payment terms in writing with the supplier before you pay.
Placing an order for The Plate Condenser with Qingdao Ruipute Heat Exchange Equipment Manufacturing Co., Ltd. is quick and straightforward on Global Trade Plaza, a leading B2B marketplace for global buyers and suppliers. You can:
When purchasing The Plate Condenser from a B2B marketplace in 2025, focus on the following critical factors:
Comparing prices and communicating directly with Qingdao Ruipute Heat Exchange Equipment Manufacturing Co., Ltd. can help ensure value for money and better sourcing decisions.
Global Trade Plaza is home to B2B buyers, wholesalers, distributors, and importers of The Plate Condenser across industries and countries. To discover the most active and high-value buyers:
Qingdao Ruipute Heat Exchange Equipment Manufacturing Co., Ltd., a B2B supplier from China, dispatches The Plate Condenser primarily through the port at China. Packaging types (e.g., bulk, custom, eco-friendly) and estimated pricing may vary based on order volume and destination. To get detailed logistics and pricing information, use Get a quote or Chat with supplier, or Sign Up for direct supplier interaction.