Steel grit

Products steel grit Chemical compositionc0.70~1.20% Mn0.6~1.20% Si0.40~1.20% Sless than 0.05% Pless than 0.05% Microhardnessnormal: 40~50hrc (377~509hv) Special: 52~56hrc (543~620hv) Special: 56~60hrc (620~713hv) Hardness deviationmax deviation ± 3.0hrc, ± 40hv Microstructureeven tempered martensite and dispersed carbon Density7.2g/cm3 Steel grit types: Gp:angular when new, this grit rapidly rounds off in use and its particularly suited descaling applications. Gl:although harder then gp steel grit, also loses its sharp edges during shto basting and is particularly suited to descaling and surface preparation applications. Gh:having maximum hardness, gh always remains angular in its operating mix. These abrasive are particularly effective in surface treatment processes and produce a uniform, etched finish, gh angular grit should only be used in wheel machines where working requirements take precedence over cost price considerations (for example with rolling mill cylinders or when a special finish is needed). For use mainly with compressed air equipment. 25 kgs/bag, 40bags/pallect.