SMD moded power inductor

Item Specifics: Model: PIM1030R12MZ L0(uH)/inductance at 0A,100KH):Typ.:0.12 DCR (mª+)at 25ípC:Typ.0.65/Max:0.75 Irated(Adc)/Heat RatingCurrent :Typ.:30 Isat(Adc)/Saturation Current:Typ.:75 Available L0(uH):From 0.12 to 10.00 Molded Power Inductor Operating temperature : -55íµ ~ +125íµ Ambient Temperature, Maximum : 85íµ Temperature Rise, Maximum: 40íµ Features Low profile, high current SMD type. Lowest DCR/µH, in this package size, low buzz noise due to its gap-less structure, RoHS compliant. Frequency range up to 5MHz. Lowest DCR/µH, in this package size Low buzz noise due to its gap-less structure RoHS compliant. Applications Notebook/Desktop/Server/Video Card applications. High current POL converters. Low profile, high current power supplies Battery powered devices. Ideal for power source circuits, DC-DC converter DC-AC inverters inductor application. Note: 1. L0 is inductance tested at 0 Adc. 2. Isat is the DC current which cause the inductance drop approximately 30% of its nominal inductance without current. 3. Irated is the DC current which cause the surface temperature of the part increase appproximately than 40íµ. 4. Operating Temperature Range: - 55íµ to +125íµ 5. The part temperature (ambient + temp rise ) should not exceed 125íµ under worse case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provision all affect the part temperature. Part temperature should be verified in the end application. 6. The rated current as listed is either the saturation current or the heating current depending on which value is lower.