Sanitary centrifugal pump

Sanitary centrifugal pump Performance Rate of flow: 3m3/h-60m3/h Pressure: Max working pressureí_0.45Mpa Max entrance pressure: 0.4Mpa Temperature scope: ¿C10íµ - + 140íµ Noise level: 86db Characteristics: MP centrifugal sanitary pump is a pump of single grade, single suction, semi-open impeller. With elaborate design for pump shell and impeller, the resistance is greatly reduced which makes the medium conveyed smoothly and softly. Semi-open impeller structure guarantees the best fluid power and sanitary characteristics. Inside the pump, the shaft seal situates at the best position of medium flow, which makes the seal easy to cool or wash and so to prolong the mechanical sealí»s service life. For the special structure of the pump, the whole performance of the pump is improved a lot. The smooth polished surface and non-dead corner design meet the requests of CIP/SIP, which make the pump easy to wash, therefore it could satisfy large scale of customers who have high level sanitary requests. The MP pump is characterized with easy starting, high efficiency, stable running, easy maintenance, etc. The stable starting prevents sudden pressure change, this can protect effectively piping system and its parts. The superior performance of the pump prolongs the motor service life with low noise, low vibration, high quality protection grade and insulation grade. The movable end frames could adjust height freely and it could also be installed on various brackets. Material The major material of the pump is AISI304 or AISI316L stainless steel which has low shearing force. The parts contact with medium could be treated with different choice of polishing, which ranges from sanitary polishing to super mirror surface polishing. Material Impeller: Cast totally of AISI304 or AISI316L Pump shell: Rolled totally of AISI304 or AISI316L Mechanical seal: Milestone centrifugal sanitary pump has a balance single(double) end(s) sanitary mechanical seal Shaft: Made of AISI304 or AISI316L by numerically-controlled machine tool O-ring: Silicon rubber ,fluororubber, Teflon or supply according to the requests. Surface treatment status Inside of the front and back cover, impeller are polished Outside surface is polished with mirror surface standard or treated by sandblast Motor 1.The motor is designed and made according to international standard International electrician committee IEC60034, IEC60072 Britain standard BS4999-5000 Australian standard ASI1359-2 Germany standard DIN42673 Conforms to EC í¦CEí¦mark request 2.The motor conforms to the following standards GB755 (IEC60034) GB10069 (IEC60034-9) Q/JBQS28 3.Equipped with standard wholly sealed, cold wind squirrel cage asynchronous motor, whose size conforms to IEC60034 and DIN42673. Entrance jointing methods A is ISO buckle joint B is ISO screw loose joint C is DIN screw loose joint D is SMS screw loose joint E is BS screw loose joint F is flange joint