🚀Join Free - List Your Products & Reach Verified Global BuyersSign Up Free →
🚀List Your Products, Reach Global BuyersJoin Free

Ptfe Dispersion Resin Medium Compression Ratio

PTFE Dispersion Resin (medium compression ratio)

  • Estimate pricingPrice on request
  • ModelF500
  • Compression ratio range100:1 to 600:1
  • Processing pressure1.5-2.0 MPa[220-290 psi]
  • Lubricant removal temperature100-300°C(212-572°F)

Your request goes to Everflon Fluoropolymers. Follow up with them in Messages on Global Trade Plaza.

Supplier based in ChinaOn Global Trade Plaza since Oct 2026Similar products from other sellers

Products Description

EverFlon ®PTFE Dispersion Fine Powder F500 is a soft white polymer made from a water-based dispersion of PTFE. These fine powders have the lowest coefficient of friction, highest heat resistance, chemical resistance, electrical properties and non-stick properties of all fluoropolymers. It has the unique ability to shear a lubricating paste by extruding it into a bonded fiber matrix with useful structural integrity. EverFlon ®PTFE F500 is designed for machining at medium and high pressure rates from 100:1 to 600:1. It is particularly suitable for the production of high quality tubes, spiral tubes and wire coatings. This grade is also well suited for post-processing techniques such as flanging, welding, blow molding and turning. Processing suggestion EverFlon ®PTFE F500 is extruded using liquid processing AIDS such as naphtha. During the paste extrusion process, the powder is mixed with a lubricating agent and then compressed under light pressure (1.5-2.0 MPa[220-290 psi]) into a cylindrical pre-formed bad material. The preformed blank is placed into the barrel of the paste extruder, where the composition is passed through a finishing die under high pressure to produce foaming, tubing or wire coating. After extrusion, the product has a low density but coherent fiber structure. PTFE F500 is usually processed under heat in a step-by-step process into solid resin products, such as tubes. Heating is carried out in two steps, either simultaneously with extrusion or separately. Usually the lubricant must be removed first by heating in a temperature range of 100-300°C(212-572°F). A sintering step is then performed to melt the resin above its melting point of approximately 342°(648°F) and produce a non-porous solid PTFE resin.

Product Categories

Products Specification

  • ModelF500
  • Compression ratio range100:1 to 600:1
  • Processing pressure1.5-2.0 MPa[220-290 psi]
  • Lubricant removal temperature100-300°C(212-572°F)
  • Sintering temperatureabove 342°C(648°F)

Supplier information

trusted

Basic member

Membership

Everflon Fluoropolymers

  • China China

(0.0)

Business type - Contact Seller

Get a quote from Everflon Fluoropolymers

Post your requirement – Global Trade Plaza

Describe what you need once. Suppliers who deal in it see your requirement as a buy lead and can send you offers.

    Select Payment terms

    Buy Online Wholesale PTFE Dispersion Resin (medium compression ratio) from Supplier & Exporter in China

    PTFE Dispersion Resin (medium compression ratio) is a plastic raw material product. EverFlon®PTFE Dispersion Fine Powder F500 is a soft white polymer made from a water-based dispersion of PTFE. It has the unique ability to shear a lubricating paste by extruding it into a bonded fiber matrix with useful structural integrity. EverFlon®PTFE F500 is designed for machining at medium and high pressure rates from 100:1 to 600:1. This grade is also well suited for post-processing techniques such as flanging, welding, blow molding and turning. Processing suggestion EverFlon®PTFE F500 is extruded using liquid processing AIDS such as naphtha. During the paste extrusion process, the powder is mixed with a lubricating agent and then compressed under light pressure (1.5-2.0 MPa[220-290 psi]) into a cylindrical pre-formed blank material. The preformed blank is placed into the barrel of the paste extruder, where the composition is passed through a finishing die under high pressure to produce foaming, tubing or wire coating. After extrusion, the product has a low density but coherent fiber structure. PTFE F500 is usually processed under heat in a step-by-step process into solid resin products, such as tubes. Heating is carried out in two steps, either simultaneously with extrusion or separately. Usually the lubricant must be removed first by heating in a temperature range of 100-300°C(212-572°F). A sintering step is then performed to melt the resin above its melting point of approximately 342°C(648°F) and produce a non-porous solid PTFE resin.

    Import Wholesale PTFE Dispersion Resin (medium compression ratio) for Your Business Needs

    The seller has not added a specification yet; ask for the data sheet or test certificate. Ask Everflon Fluoropolymers for a firm quote and delivery terms before you order.

    About Supplier

    Everflon Fluoropolymers is a B2B supplier based in China, listed on Global Trade Plaza since October 2026. Use Inquire now or Chat with supplier to ask Everflon Fluoropolymers for prices, specifications and documents for PTFE Dispersion Resin (medium compression ratio).

    Supplier Details for PTFE Dispersion Resin (medium compression ratio)

    • Member since - Oct 2026
    • Business Type - Contact Seller
    • Deals in Product Type - Plastic Raw Materials
    • Country - China

    Frequently Asked Questions (FAQs) on PTFE Dispersion Resin (medium compression ratio)

    1. What is the Seller’s Policy on Payment for PTFE Dispersion Resin (medium compression ratio)?

    Ask Everflon Fluoropolymers which payment terms they accept for PTFE Dispersion Resin (medium compression ratio). Agree the payment terms in writing with the supplier before you pay.

    2. How to Place an Order for PTFE Dispersion Resin (medium compression ratio) with Everflon Fluoropolymers?

    Placing an order for PTFE Dispersion Resin (medium compression ratio) with Everflon Fluoropolymers is quick and straightforward on Global Trade Plaza, a leading B2B marketplace for global buyers and suppliers. You can:

  • Click Get a quote to send your requirement to the supplier
  • Use Chat with supplier to ask questions
  • Post your requirement to hear from other suppliers too
  • 3. What Should You Consider When Buying PTFE Dispersion Resin (medium compression ratio) Online in 2025?

    When purchasing PTFE Dispersion Resin (medium compression ratio) from a B2B marketplace in 2025, focus on the following critical factors:

  • Product specifications (material, durability, features)
  • Quality certifications and compliance
  • Supplier credibility and customer reviews
  • Minimum Order Quantity (MOQ) and bulk pricing
  • Lead time and delivery timelines
  • Comparing prices and communicating directly with Everflon Fluoropolymers can help ensure value for money and better sourcing decisions.

    4. Who Are the Top B2B Importers and Buyers of PTFE Dispersion Resin (medium compression ratio) on Global Trade Plaza?

    Global Trade Plaza is home to B2B buyers, wholesalers, distributors, and importers of PTFE Dispersion Resin (medium compression ratio) across industries and countries. To discover the most active and high-value buyers:

  • Visit the Buy Leads section
  • Filter by industry, product type, or country
  • Create an account to access full buyer contact details
  • 5. What is the Port of Dispatch, Estimated Price, and Packaging Type Offered by Everflon Fluoropolymers?

    Everflon Fluoropolymers, a B2B supplier from China, dispatches PTFE Dispersion Resin (medium compression ratio) primarily through the port at China. Packaging types (e.g., bulk, custom, eco-friendly) and estimated pricing may vary based on order volume and destination. To get detailed logistics and pricing information, use Get a quote or Chat with supplier, or Sign Up for direct supplier interaction.