Oxy-hydrogen Flame Wires Welding Machine

Oxy-hydrogen flame enameled wire welding machine uses the oxy-hydrogen gas to set fire & burn off enameled cover Ors, potentiometers, electromagnets, and other applications which require tight coils of wire. Zles, it is not only suitable to weld different kinds of enameled wires, but also is more convenient to use. Due to different motors from different factories, the diameter and quantity of enameled wires are also different. There is no any uniform standard, so please contact with us while you choose the models, we will give you a professional selection reference as your requirement. About enameled wire Magnet wire or enameled wire is a copper or aluminium wire coated with a very thin layer of insulation. It is used in the construction of transformers, inductors, motors, speakers, hard disk head actuators, potentiometers, electromagnets, and other applications which require tight coils of wire. The wire itself is most often fully annealed, electrolytically refined copper. Aluminium magnet wire is sometimes used for large transformers and motors. An aluminium wire must have 1.6 times the cross sectional area as a copper wire to achieve comparable dc resistance. Due to this, copper magnet wires contribute to improving energy efficiency in equipment such as electric motors. Ac voltage requirement (v) 220/110 Phase single Dc voltage &current (a) 5v 60a Max gas output 100l/h Max. Working pressure (kg/cm2) 1.3 Max. Water consumption (l/h) 0.06 Water feed manual Max. Flame modifier consumption (l/h) 0.05 Flame modifier feed manual Dimensions - l*w*h (mm) 435*308*540mm Gross weight (kg) 15