MF605-Epoxy Primer
- Estimate pricingPrice on request
- ModelMF605-Epoxy Primer
- Mixing RatioMF605 Epoxy Primer : MF105 Epoxy Hardener : MF63 Epoxy Thinner = 4 : 1 : 1~2
- Viscosity16-19s to drop off in 4# viscosity cup at 25°C
- Spray Gun SetupGravity Feed: 1.2-1.5mm, 4-5kg/cm²; Suction Feed: 1.4-1.6mm, 4-5kg/cm²
Your request goes to Guangzhou Zhenroumei Chemical Coatings Limited. Follow up with them in Messages on Global Trade Plaza.
Products Description
GOODSIF Series Product Name/Model:MF605-Epoxy Primer Characteristic: Good fillibility, easy sanding, give excellent rust proofing for bare metal, good adhesion power to steel, aluminium, galvanized steel and stainless steel, excellent chemical corrosion resistance and rust resistance. Substrates Dried and sanded existing finishes, steel, aluminium, stainless steel, galvanized steel, glass fiber reinforced plastic. Surface Cleaning Wash by warm soap, remove wax, silicon and other contaminations with degreaser, sanding with P800-P1000, wash with clean water then keep dry; again with degreaser. Mixing Ratio MF605 Epoxy Primer MF105 Epoxy Hardener MF63 Epoxy Thinner 4 1 1~2 ï¼?30â?? MF605 Epoxy Primer MF105 Epoxy Hardener MF63 Epoxy Thinner Spray  Viscosity 16-19s to drop off, in 4# viscosity cup at 25°C, Pot-life Sanded with P600 or P800 sand paper, do following construction after drying Spray Gun/Set Up Gravity Feed: 1.2-1.5mm 4-5kg/cm ² Suction Feed: 1.4-1.6mm 4-5kg/cm ² Spray Technology Coats&Thickness: 2-3 coats, total 25-35um. Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on temperature and paint film. Drying Time A. Allow 10-20 minutes air-drying,then 60°C baking 30 minutes, can sand after cool down. B. Air-drying time 3 hours, at 20°C. Shelf Life 2 years in original sealed can, cool and dry place at 25â??. Package 1LÃ?12 or 3.75LÃ?4 Note: 1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry. 2. At ambient temperature higher than 30â??, add appropriate Retarder Solvent into thinner to avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent. 3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult to be cleaned after dry.
Product Categories
Products Specification
- ModelMF605-Epoxy Primer
- Mixing RatioMF605 Epoxy Primer : MF105 Epoxy Hardener : MF63 Epoxy Thinner = 4 : 1 : 1~2
- Viscosity16-19s to drop off in 4# viscosity cup at 25°C
- Spray Gun SetupGravity Feed: 1.2-1.5mm, 4-5kg/cm²; Suction Feed: 1.4-1.6mm, 4-5kg/cm²
- Coats & Thickness2-3 coats, total 25-35um
- Flash-Off Time5-10 minutes between coats at 25°C
- Drying TimeA. 10-20 minutes air-drying + 60°C baking for 30 minutes; B. 3 hours air-drying at 20°C
- Shelf Life2 years in original sealed can, cool and dry place at 25°C
- Package1L×12 or 3.75L×4
Get a quote from Guangzhou Zhenroumei Chemical Coatings Limited
MF605-Epoxy Primer from other sellers
Post your requirement – Global Trade Plaza
Describe what you need once. Suppliers who deal in it see your requirement as a buy lead and can send you offers.
More related Products from Seller
Other Products from Seller
Buy Online Wholesale MF605-Epoxy Primer from Supplier & Exporter in
GOODSIF Series Product Name/Model: MF605-Epoxy Primer. Substrates: Dried and sanded existing finishes, steel, aluminium, stainless steel, galvanized steel, glass fiber reinforced plastic. Surface Cleaning: Wash by warm soap, remove wax, silicon and other contaminations with degreaser, sanding with P800-P1000, wash with clean water then keep dry; again with degreaser. Mixing Ratio: MF605 Epoxy Primer MF105 Epoxy Hardener MF63 Epoxy Thinner 4 1 1~2 ï¼?30â?? MF605 Epoxy Primer MF105 Epoxy Hardener MF63 Epoxy Thinner Spray  Viscosity 16-19s to drop off, in 4# viscosity cup at 25°C, Pot-life Sanded with P600 or P800 sand paper, do following construction after drying Spray Gun/Set Up Gravity Feed: 1.2-1.5mm 4-5kg/cm ² Suction Feed: 1.4-1.6mm 4-5kg/cm ² Spray Technology Coats&Thickness: 2-3 coats, total 25-35um. Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on temperature and paint film. Drying Time A. Allow 10-20 minutes air-drying,then 60°C baking 30 minutes, can sand after cool down. B. Air-drying time 3 hours, at 20°C. Shelf Life 2 years in original sealed can, cool and dry place at 25â??. Package 1LÃ?12 or 3.75LÃ?4 Note: 1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry. 2. At ambient temperature higher than 30â??, add appropriate Retarder Solvent into thinner to avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent. 3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments imme
Import Wholesale MF605-Epoxy Primer for Your Business Needs
The seller has not added a specification yet; ask for the data sheet or test certificate. Ask Guangzhou Zhenroumei Chemical Coatings Limited for a firm quote and delivery terms before you order.
About Supplier
Guangzhou Zhenroumei Chemical Coatings Limited is a B2B supplier based in China, listed on Global Trade Plaza since October 2026. Use Inquire now or Chat with supplier to ask Guangzhou Zhenroumei Chemical Coatings Limited for prices, specifications and documents for MF605-Epoxy Primer.
Supplier Details for MF605-Epoxy Primer
- Member since - Oct 2026
- Business Type - Contact Seller
- Deals in Product Type - Agriculture
- Country - China
Frequently Asked Questions (FAQs) on MF605-Epoxy Primer
1. What is the Seller’s Policy on Payment for MF605-Epoxy Primer?
Ask Guangzhou Zhenroumei Chemical Coatings Limited which payment terms they accept for MF605-Epoxy Primer. Agree the payment terms in writing with the supplier before you pay.
2. How to Place an Order for MF605-Epoxy Primer with Guangzhou Zhenroumei Chemical Coatings Limited?
Click Get a quote to send your requirement to the supplier Use Chat with supplier to ask questions Post your requirement to hear from other suppliers too
Placing an order for MF605-Epoxy Primer with Guangzhou Zhenroumei Chemical Coatings Limited is quick and straightforward on Global Trade Plaza, a leading B2B marketplace for global buyers and suppliers. You can:
3. What Should You Consider When Buying MF605-Epoxy Primer Online in 2025?
Product specifications (material, durability, features) Quality certifications and compliance Supplier credibility and customer reviews Minimum Order Quantity (MOQ) and bulk pricing Lead time and delivery timelines
When purchasing MF605-Epoxy Primer from a B2B marketplace in 2025, focus on the following critical factors:
Comparing prices and communicating directly with Guangzhou Zhenroumei Chemical Coatings Limited can help ensure value for money and better sourcing decisions.
4. Who Are the Top B2B Importers and Buyers of MF605-Epoxy Primer on Global Trade Plaza?
Visit the Buy Leads section Filter by industry, product type, or country Create an account to access full buyer contact details
Global Trade Plaza is home to B2B buyers, wholesalers, distributors, and importers of MF605-Epoxy Primer across industries and countries. To discover the most active and high-value buyers:
5. What is the Port of Dispatch, Estimated Price, and Packaging Type Offered by Guangzhou Zhenroumei Chemical Coatings Limited?
Guangzhou Zhenroumei Chemical Coatings Limited, a B2B supplier from China, dispatches MF605-Epoxy Primer primarily through the port at China. Packaging types (e.g., bulk, custom, eco-friendly) and estimated pricing may vary based on order volume and destination. To get detailed logistics and pricing information, use Get a quote or Chat with supplier, or Sign Up for direct supplier interaction.
Explore Top Product Categories
- Alcohol Based Hand Sanitizer
- Paper Soap
- Antibacterial Hand Wash
- Cosmetic Kits
- Detergent Chemicals
- Industrial Chemicals
- Laboratory Chemicals
- Leather Chemicals
- Car Accessories
- Motorcycle Parts
- Automobile Brakes Spare Parts
- Motorcycle, Scooters & ATV Bikes
- Building Construction Machineries & Equipments
- Bricks
- Cupboards, Door, Gates, Grills & Windows
- Wall Tiles
- Filters, Water Treatment Plants
- Household Cleaning Products
- Wiping Rags, Mops, Dusters, Sponge, Brushes, Scourer
- Soap & Detergent
- Industrial Gears & Gear Boxes
- Machined Components
- Bolts
- Nuts
- Food Packaging Bags
- Wooden Packaging Boxes
- Offset Printing Machinery & Equipments
- Packaging Machinery
Related Products
MF606-2K Primer SurfacerMSD-0960 Thinner SRAMSD-0925 Retarder SolventMSD-0936-Matting Agent.BYTF605-Epoxy PrimerBYTF606-2K Primer SurfacerF400-1K Primer SurfacerBYTX-1/2/3/ ThinnerBM2K Solid ColorsBYT100-2K BinderBYT160-1K Binder  / BYT4530-Flip ControllerMF912-1K Binder and MF920-Flip ControllerMF910-DegreaserMF2K Solid Colorsdrive package glue rollerTraining Spring Idler GroupRedirection RollerYyd Oil Cooled Type Electric DrumHanging Type Idler GroupBelt Training IdlerFlat Return IdlerFull Automatic Parallel Training Idler GroupZirconium Bar , Zirconium RodMolybdenum Sheet, Molybdenum FoilMolybdenum Rods/molybdenum WireMolybdenum heavy hammerNiobium wire zirconium, niobium, zirconium rods
Related Categories
AgricultureElectronic & ElectricalConstruction & real estateIndustrial goods & chemicalMiscellaneousApparel and fashion accessoriesFood & BeveragesHome furnishing & suppliesMinerals & metalsAgriculture Machinery & EquipmentAgriculture BagsAgriculture Choppers, Shredders & CuttersAgriculture Farm TractorsAgriculture Fertilizers & PesticidesAgriculture SeedsBactericidesDAP (Diammonium Phosphate)Agriculture Products1121 Basmati RiceAjwa DatesAlmondsFlowers And Plants Related ProductsAgapanthus Flower BulbsAloe VeraAmaryllis Lily Flower Bulbs