High Gloss Enamel Paint ( Wood & Metal Use )

PRODUCT INFORMATION PRODUCT NAMEâ?¡ Sequoia 3000 Gloss Finish DESCRIPTION Sequoia 3000 Gloss Finish is a premium solvent based high gloss finish, it is an oil-modified alkyd enamel paint. It is easy to apply and forms a smooth, tough paint film which has excellent gloss, fungus resistance and durability. USAGE For decoration and protection. Suitable for all types of interior and exterior metal and wood surfaces BENEFITS High gloss and excellent gloss retention Excellent gloss fastness Excellent durability Washable PACK SIZE 1 litre, 5 litres COLOUR RANGE Refer to Sequoia 3000 Gloss Finish colour chart PERFORMANCE GUIDE CHEMICAL RESISTANCE Resistant to mild chemical fumes. Special paint systems required if surface is subject to constant chemical attack HEAT RESISTANCE Generally resistant to heat up to 0c. Discolouration will occur after a prolong time if surface is constantly heated WATER RESISTANCE Resistant to normal atmospheric humidity present. Will withstand repeated washing. Not suitable for surface immerse in water THEORETICAL COVERAGE 16-18 meter2 /liter. Note: Surface coverage will alter depending on condition of surface to be paint PRE-APPLICATION SURFACE PREPERATION Generally all surfaces to be coated must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust. For optimal performance, new galvanized surface should be cleaned and degreased to ensure good adhesion PREVIOUSLY PAINTED SURFACEâ?¡All loose and flaking paint film must be removed. Surface must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust. RECOMMENDED PAINT SYSTEM Types of Surface Undercoat (1 coat) Finish (2 coats) Wood REDWOOD white undercoat Metal SEQUOIA PROTECTIVE COATING OR NASA oxide SEQUOIA 3000 GLOSS PAINT PAINT APPLICATION THINNINGâ?¡ For normal use, thinning is not required. If required, add 1 part of white spirit (10%) to 10 part of paint. Note: Excessive thinning will affect the quality of the paint. DRYTIME Touch dry : 2 hours Hard dry/Recoat : 8 hours CLEAN UP â?¡Clean all equipment with white spirit immediately afteruse. Allow empty container to dry prior to disposal. PRODUCT DATA COMPOSITION â?¡Pigments: Lightfast organic pigment, lightfast inorganic pigment. Blinder : Organic Alkyd Solvent : White spirit