Energy saving EPS sandwich wall panel

The EPS sandwich wall panel is a new kind of light weight energy saving compound board, which is taking fiber reinforced calcium silicate board or cement board as face panel, cement, EPS and fly ash as core. Its using for interior and exterior wall partition on steel or concrete structure building, new construction or renovations. It can replace construction materials such as block, wire spatial grid structure perlite board, perlite porous board and etc. It can widely be applied to wall materials of various high and low buildings such as bank, office building, hospital, school, hotel, mall, amusement, old house reconstruction, residence and workshop. Feature 1) Energy saving, Light weight, Environmental Protection The polystyrene granule in Vanjoin board has good heat-insulation effect and the heat lost ratio is far below the other building materials. It does not include harmful substance. As environmental products, it is highly recommended by the government The capacity is 650 kg/m3, just one sixth of the brick building. 2) Most area saving In comparison of the inner wall panel 75mm and 120mm,every 12m will increase practical area, for the 100m2 house, it will increase 4.26m2. 3) Most Waterproof and Damp proof Because of the special features of the solid panel, the feature of waterproof and damp proof is very obvious. The test report shows that without any waterproof facing, we build one pool with our products, and fill it with water; the back of the wall can keep dry without any blot. When in damp weather, there isn't any water condensation. 4) Most Fireproof Under 1000 degree centigrade for 240 minutes, there isn't damage to the wall. It is tested by National Fireproof Building Material Quality Supervision testing center. Vanjoin products have reached National A grade standard. 5) Most sound insulation 42dB sound insulation, highly reach the national standard.Because of the special feature of Vanjoin products, like high density, the sound insulation effect is better than common material, as the general brick material can only reach 35dB . 6) Best Hanging Strength Expansion bolt can be installed in random part of the wall, the point hanging force can reach more than 50kg, and it will bring more convenience to the decoration. 7)Most anti seismic and impact resistance As the wall is Prefabricated ,and the board is triad structure, there is no building material can stand comparison with Vanjoin products in the aspect of anti-seismic and impact resistance features . 8) Largest Span and height thin webbed wall As the High Strength and good integrity, Vanjoin products can be used in the Large Span and height wall building. It just needs simple steel structure, and section steel buried in the wall. The large span wall impact resistance ability will be 1.5 times more than common material. The simple construction height is 16.8m 9)Most civilized ,environmental, high efficiency construction.Simple construction and transportation, stacking health, dry operation, no sludge, low loss, less waste, construction convenient, no bricklaying plastering, shorten the construction period,, slotted fast, easy to install water and electricity pipeline, construction efficiency is 8-10 times of the normal masonry, its a kind of high-quality reusable wall. Specification Specification: 2,270 to 2,300 x 610 x 120mm Wall thickness: 60, 75, 90, 100, 120, and 150mm Maximum width: 610mm Length: according to customers demands, engineering requirements and shipment conditions Application : the product can replace construction materials as red bricks, clay solids bricks, air bricks, color coated steel sandwich boards, gypsum blocks, wire spatial grid structure per lite boards, and per lite porous boards Applied to wall materials of various high and low buildings such as banks, office buildings, hospitals, schools, hotels, malls, amusement halls, active barracks, old houses reconstruction, residence, and workshops. Standard Export Packaging