Your request goes to Universal Hydrocarbons Co. Ltd.. Follow up with them in Messages on Global Trade Plaza.
Carbon Electrode Paste / Soderberg Electrode Paste Quality Specification: At the customers end the paste is fed in the upper part of the electrode it softens and melts forming the shape of the electrode casting. Flow ability of carbon electrode paste is essential for proper operation of electrode. It is important that the paste flows at a reasonable temperature and fills the casting of the electrode, maintaining a consistent mixture of components. The paste then gets baked to a solid mass as it moves down and is capable of passing the required current to the furnace charge. The plasticity of paste , the measure of its flow ability is controlled in the mixer by adjusting the binder content or percentage of coke fines. The lower baked part of the electrode is the final electrode product. The physical properties of this paste are of vital importance to ensure proper electrode operation without breakages. Green paste: A) Plasticity : 30-35%, 35-40% (or as per buyers requirement ) B) V.M. : 12-14% C) ash : 0.5% max D) f.C. : 86% min E) Apparent density : 1.58gm/ccmin. Baked paste : A) f.C. : 99% min B) porosity : 22-24% C) Apparent density : 1.36gm/cc min D) ccs : 250kg/cm2 min E) electrical resistivity : 70-90 micro ohm meter. Size : mould of 24ö dia & 4ö thick (wt. Approx 46kg. To 48 kg. Per block). 24" dia & 4"thick approx 46 to 48 per block. Size in briquette form or as per buyers requirement can also be made available.
Describe what you need once. Suppliers who deal in it see your requirement as a buy lead and can send you offers.
This carbon electrode paste is designed for Soderberg electrodes where the paste softens and melts to form the electrode shape before baking into a solid conductive mass. The green paste offers plasticity ranges of 30-35% or 35-40% with volatile matter of 12-14%, ash capped at 0.5%, fixed carbon of at least 86%, and apparent density of 1.58 gm/cc minimum. After baking, the paste achieves fixed carbon of 99% minimum, porosity of 22-24%, apparent density of 1.36 gm/cc minimum, cold crushing strength of 250 kg/cm2 minimum, and electrical resistivity of 70-90 micro ohm meter. Standard supply is in 24-inch diameter by 4-inch thick moulded blocks weighing approximately 46 to 48 kg each, with briquette forms available to buyer requirements.
The seller has not added a specification yet; ask for the data sheet or test certificate. Ask Universal Hydrocarbons Co. Ltd. for a firm quote and delivery terms before you order.
Universal Hydrocarbons Co. Ltd. is a B2B supplier based in India, listed on Global Trade Plaza since October 2026. Use Inquire now or Chat with supplier to ask Universal Hydrocarbons Co. Ltd. for prices, specifications and documents for Carbon Electrode Paste.
Ask Universal Hydrocarbons Co. Ltd. which payment terms they accept for Carbon Electrode Paste. Agree the payment terms in writing with the supplier before you pay.
Placing an order for Carbon Electrode Paste with Universal Hydrocarbons Co. Ltd. is quick and straightforward on Global Trade Plaza, a leading B2B marketplace for global buyers and suppliers. You can:
When purchasing Carbon Electrode Paste from a B2B marketplace in 2025, focus on the following critical factors:
Comparing prices and communicating directly with Universal Hydrocarbons Co. Ltd. can help ensure value for money and better sourcing decisions.
Global Trade Plaza is home to B2B buyers, wholesalers, distributors, and importers of Carbon Electrode Paste across industries and countries. To discover the most active and high-value buyers:
Universal Hydrocarbons Co. Ltd., a B2B supplier from India, dispatches Carbon Electrode Paste primarily through the port at India. Packaging types (e.g., bulk, custom, eco-friendly) and estimated pricing may vary based on order volume and destination. To get detailed logistics and pricing information, use Get a quote or Chat with supplier, or Sign Up for direct supplier interaction.