Bm-3000 Vertical Concrete Pipe Making Machine

Vertical vibration concrete pipe machine is regarded as a replacement of the traditional manufacturing facilities with powerful mandrel vibrator, the highest frequency of pipe machine, these make the machine could produce almost any dimension of products from 800mm to 3000mm, and length could up to 2.5 meters Take dry-cast concrete as the aggregate, the mould could be removed instantly after production. Vertical Vibration Casting pipe making Machine is one of the most advanced Concrete pipes making technology in the world , which integrate the technology of Mechanical, electric, Hydraulic, and the Automatics. The vertical vibration concrete pipe making machine with new design could Reinforced Concrete pipes, Steel Jacking pipes, Lined PVC /HDPE pipes, Manhole, Box Culvert, Concrete Wells All these pipes are widely used in the Road Culvert, Agricultural irrigation, Water Treatment, Power plant, Public works, Water Drainage. Core Vibration system The powerful vibrator in this vertical vibration concrete pipe machine, maximizes the density and strength of the concrete. The vibration force of up to 398KN, and the maximum frequency of 4000rpm, makes the concrete flow like liquid in the mold, forming a perfectly shaped pipe with a smooth surface. Automatic control Steel mould is significant to make precast concrete Box Culvert, High-quality mould could assure the finished product as accurate as designed. BM concrete box culvert mould can be made as wet-casting and dry-casting. Out mould set on rails which makes easy to open and shut. Inner core mould is collapsed made demoulding easier and faster than traditional design. BM mould provides tongue and groove joint and flat joint as options. The strict QC system assures the error of the mould no more than 1 mm. Varies dimension, the largest size could up to 11 meters. UNLIMITED FEATURES 1) We adopt the technology of high frequency vibrating, which vibrates the concrete material thoroughly and distributes uniformly. The finished concrete pipes are with good performance of Density and structure, smooth appearance. 2) We adopt the technology of immediately mould releasing, each diameter pipe just need one set of mould. This helps to reduce the mould investment compared with other pipe forming machine, and also save a lot time and labor to assemble and disassemble moulds. Higher production efficiency and better quality 3) With half-dry casting concrete, low ratio of cement-water, only need the natural curing, it will save the steam curing cost. 4) . High automation, with 360 degree automatic concrete feeding system, the vibrator core rod is Variable frequency controlled, the exciting force will be adjustable to satisfy different diameter and length pipe production. The hydraulic system provide enough power to the plant, and the oil cooling system, and lubricating system promise the longer running life.