ASTM A213 Alloy Pipes

ASTM/ASME Standard Alloy Pipes Specification: ASTM A213M-09 Standard Specication for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, Heat-Exchanger Tubes. This standard is issued under the fixed designation A 213/A 213M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (') indicates an editorial change since the last revision or reapproval. Size (mm) we can supply: Hot-rolled: O.D.: 51-508; W.T.:7~60; L: max 16000 Cold-drawn: O.D.: 10-50; W.T.:2~10; L: max 16000 Hot-expanded:O.D.: 325-1020; W.T.:6~50; L: max 12000 and other specifications in accordance with customer requirements. Packing: Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, Nodestructive Test, Hydrostatic Test. Surface Treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting, Epoxy & Fbe Coating Painting as requested. Mechanical properties: Steel Grade Tensile StrengthN/mm2(min) Yield StrengthN/mm2(min) Elongation % (min) TP304 515 205 35 TP304L 485 170 35 TP316 515 205 35 TP316L 485 170 35 TP321 515 205 35 T11 =415 =205 30 T12 =415 =220 --- T13 =415 =205 30 Chemical Composition(%, max) Steel Grade C Si Mn Cr Ni Mo S P TP304 0,08 0,75 2 18 - 20 8 - 11 - 0,03 0,04 TP304L 0,035 0,75 2 18 - 20 8 - 13 - 0,03 0,04 TP316 0,08 0,75 2 16 - 18 11 - 14 2 - 3 0,03 0,04 TP316L 0,035 0,75 2 16 - 18 10 - 15 2 - 3 0,03 0,04 TP321 0,08 0,75 2 17 - 20 9 - 13 - 0,03 0,04 T11 0.05-0.15 0.50-1.00 0.30-0.60 0.5-1.0 --- 1.0-1.5 =0.25 =0.025 T12 0.05-0.15 =0.50 0.30-0.61 0.80-1.25 --- 0.44-0.65 =0.25 =0.025 T13 0.05-0.15 =0.50 0.30-0.60 1.90-2.60 --- 0.87-1.13 =0.25 =0.025 Ordering Information Orders for material under this specification should include the following, as required, to describe the desired material adequately: Quantity Feet, meters, or number of lengths Name of material Seamless Alloy Steel Pipe Grade STANDARD AND STEEL GRADE Manufacture Hot-finished or cold-drawn Size using one of the following: NPS and Schedule Number Outside Diameter and Nominal Wall Thickness Length Specific or Random End Finish