
Shipping fertilizer cargo in bulk demands strict adherence to the International Maritime Solid Bulk Cargoes (IMSBC) Code because every grade carries unique hazards, moisture limits, and stowage factors that dictate vessel selection, hold preparation, and voyage monitoring. A single missed temperature reading on ammonium nitrate or a moisture certificate error on urea can trigger port state control detention, charterparty disputes, or cargo claims that erase voyage profit.
This guide covers the IMSBC classification tables that separate Group B Materials Hazardous only in Bulk from Group C cargoes, the mandatory shipper declarations and hold cleanliness certificates required before loading, and the physical properties, stowage factors, angles of repose, and hygroscopicity ratings, that drive parcel sizing from Handysize to Capesize. You will learn the exact documentation package each schedule demands, the hold preparation steps surveyors verify, the ventilation and temperature protocols masters must log, and the commercial impact of cubic versus weight-limited cargoes on freight revenue per voyage.
Fertilizer cargo in bulk under the IMSBC Code means any solid inorganic or organic material shipped unpackaged in a ship's hold that is intended to supply nitrogen, phosphorus, potassium or secondary nutrients to soil. The Code applies once the cargo is loaded loose rather than in bags, big bags or intermediate bulk containers. Total fertiliser trade was more than 190 million tonnes in 2024 according to Drewry. The schedules cover straight nitrogen products such as urea and ammonium nitrate, phosphate materials including diammonium phosphate (DAP), monoammonium phosphate (MAP) and phosphate rock, potash grades such as muriate of potash (MOP) and sulfate of potash (SOP), sulphur in formed or crushed form, and compound NPK blends manufactured by granulation or compaction. Each schedule sets the mandatory test certificates, moisture limits, stowage factors and ventilation rules that the master and terminal must follow.
Nitrogen products dominate bulk volumes with urea and ammonium nitrate grades as the primary cargoes. Phosphate cargoes move as DAP at 18-46-0, MAP at 11-52-0 and raw phosphate rock for direct application or acidulation. Potash travels mainly as MOP and SOP. Compound NPK blends combine two or three primary nutrients in ratios such as 15-15-15, 20-20-20 or custom formulas for specific crops. The IMSBC schedule for each grade references the chemical specification, angle of repose, bulk density range and any subsidiary hazards such as oxidising properties or self-heating.
Solid bulk fertiliser is loaded by conveyor, shiploader or grab directly into the hold without unit packaging. Bagged cargo moves in 25 kg, 50 kg or 500 kg to 1000 kg big bags stacked on pallets or slings and falls under the general cargo provisions of the CSS Code rather than the IMSBC bulk schedules. The distinction matters because bulk loading allows parcel sizes of 15,000 to 60,000 tonnes on Handysize to Panamax vessels while bagged parcels rarely exceed 5,000 tonnes due to handling speed and stowage factor penalties. Bulk shipments require hold cleanliness certificates, moisture certificates and trimming to the boundaries of the hold whereas bagged cargo requires dunnage, lashing plans and ventilation channels between stacks.
The IMSBC Code applies to every solid bulk fertiliser shipment regardless of parcel size once the cargo crosses the ship's rail in loose form. There is no minimum tonnage exemption. Even a part cargo of 2,000 tonnes of urea in a general cargo hold must comply with the urea schedule including moisture certification, temperature limits at loading and ventilation protocols. The shipper must provide a signed declaration with the transportable moisture limit (TML), actual moisture content and cargo temperature at loading. The master must verify hold cleanliness to the standard required by the specific schedule before loading commences. Non-compliance exposes the vessel to port state control detention and charterparty disputes over laytime.
Each bulk fertiliser grade is assigned to an IMSBC Group that determines its hazard profile and the mandatory precautions. Group B covers Materials Hazardous only in Bulk (MHB) that possess chemical hazards such as oxidising behaviour, self-heating or toxic gas evolution. Group C covers cargoes that are neither liable to liquefy (Group A) nor chemically hazardous in bulk (Group B) but still require stowage and segregation rules. The classification drives the documentation package, hold preparation standard, ventilation strategy and emergency response plan. Global fertiliser trade volumes are forecast to grow at around 2, 3% annually according to Drewry. The table below maps the major grades to their schedules, groups, UN numbers and MHB status.
| Fertiliser Grade | IMSBC Schedule Name | Group | UN Number | MHB Status | Primary Hazard |
|---|---|---|---|---|---|
| Ammonium Nitrate (fertiliser grade) | AMMONIUM NITRATE BASED FERTILISER | B | 2067 | Yes | Oxidising, self-heating |
| Ammonium Nitrate (high nitrogen) | AMMONIUM NITRATE BASED FERTILISER | B | 2071 | Yes | Oxidising, explosion risk |
| Urea | UREA | C | None | No | Hygroscopic, caking |
| DAP / MAP | DIAMMONIUM PHOSPHATE / MONOAMMONIUM PHOSPHATE | C | None | No | Hygroscopic, dust |
| MOP / SOP | POTASH (MURIATE / SULPHATE) | C | None | No | Hygroscopic, corrosion |
| Sulphur (formed / crushed) | SULPHUR | B | 1350 | Yes | Flammable dust, toxic gas |
| Phosphate Rock | PHOSPHATE ROCK | C | None | No | Dust, radiation (low) |
| NPK Blends (granular) | NPK FERTILISERS | C | None | No | Hygroscopic, caking |
The table shows that only ammonium nitrate grades and sulphur fall into Group B with MHB status and UN numbers. All other major fertiliser cargoes sit in Group C without UN numbers. Group B cargoes require a Document of Compliance for the ship, a detailed MHB emergency schedule, continuous temperature monitoring and strict segregation from combustible materials. Group C cargoes need standard IMSBC documentation, moisture certificates and ventilation appropriate to hygroscopicity but do not trigger the enhanced MHB regime. Urea specifically is classified under Group C schedule UREA with no UN number and no MHB designation.
Ammonium nitrate based fertiliser appears in Group B under two UN entries. UN 2067 covers fertiliser grade material with not more than 0.2 percent combustible substances and not more than 70 percent ammonium nitrate by mass. UN 2071 covers uniform non-segregating mixtures of ammonium nitrate with added calcium carbonate or other inorganic fillers where the nitrogen content exceeds 28 percent. Both schedules require the ship to hold a Document of Compliance for solid bulk cargoes, the master to hold a certificate of training for MHB cargoes, and the cargo to be loaded at a temperature not exceeding 42 degrees Celsius. Temperature must be monitored at least every four hours during the voyage and recorded in the deck log. Any reading above 55 degrees Celsius requires immediate action including boundary cooling and preparation for jettison.
Urea travels under the UREA schedule in Group C with a stowage factor of 1.30 to 1.45 cubic metres per tonne and a moisture limit typically capped at 0.5 percent. DAP and MAP share the DIAMMONIUM PHOSPHATE and MONOAMMONIUM PHOSPHATE schedules with stowage factors of 1.10 to 1.30 and moisture limits around 1.5 to 2.0 percent according to FAO (via Agro Spectrum) (2025). Potash grades MOP and SOP use the POTASH schedule with stowage factors of 0.90 to 1.10 and low moisture limits to prevent caking. Sulphur is the exception in this list because formed and crushed sulphur both fall in Group B under UN 1350 with flammable dust and hydrogen sulphide hazards. Phosphate rock moves under the PHOSPHATE ROCK schedule in Group C with a stowage factor of 0.80 to 1.00 and negligible moisture risk. NPK blends follow the NPK FERTILISERS schedule with properties varying by formulation but generally mirroring urea for hygroscopicity and caking tendency.
The comparison table above reads directly across the six columns to show that Group B cargoes carry UN numbers, MHB status and oxidising or flammable dust hazards while Group C cargoes carry none of those designations. For the ship operator this means Group B parcels demand a higher class notation, specialised crew training, real-time temperature telemetry and a dedicated emergency response plan approved by the flag state. Group C parcels follow the standard IMSBC workflow: shipper declaration, hold cleanliness certificate, moisture certificate, ventilation log and residue disposal plan. The commercial impact appears in freight premiums for Group B tonnage and tighter laytime terms at load and discharge ports.
The stowage factor determines how many cubic metres one metric tonne occupies and directly drives vessel selection and freight calculations. Urea typically ranges from 1.30 to 1.45 m3/t while diammonium phosphate (DAP) and monoammonium phosphate (MAP) sit between 0.95 and 1.10 m3/t. Muriate of potash (MOP) is denser at 0.75 to 0.85 m3/t and ammonium nitrate (AN) varies from 0.70 to 0.90 m3/t depending on prill size. Formed sulfur occupies 0.55 to 0.65 m3/t whereas crushed sulfur is slightly heavier at 0.50 to 0.60 m3/t. Phosphate rock is the densest common grade at 0.80 to 1.00 m3/t. NPK blends mirror the dominant component but generally fall between 0.85 and 1.15 m3/t. Ammonium sulfate ranges from 0.75 to 0.90 m3/t and calcium ammonium nitrate (CAN) from 0.70 to 0.85 m3/t. These figures come from the individual IMSBC schedules and shipper declarations verified at load port.
| Cargo Grade | Stowage Factor (m3/t) | Bulk Density (t/m3) | IMSBC Group | UN Number |
|---|---|---|---|---|
| Urea | 1.30, 1.45 | 0.69, 0.77 | C | None |
| DAP | 0.95, 1.10 | 0.91, 1.05 | C | None |
| MAP | 0.95, 1.10 | 0.91, 1.05 | C | None |
| MOP (Potash) | 0.75, 0.85 | 1.18, 1.33 | C | None |
| Ammonium Nitrate | 0.70, 0.90 | 1.11, 1.43 | B (MHB) | 2067 / 2071 |
| Formed Sulfur | 0.55, 0.65 | 1.54, 1.82 | B (MHB) | 1350 |
| Crushed Sulfur | 0.50, 0.60 | 1.67, 2.00 | B (MHB) | 1350 |
| Phosphate Rock | 0.80, 1.00 | 1.00, 1.25 | C | None |
| NPK Blends | 0.85, 1.15 | 0.87, 1.18 | C | None |
| Ammonium Sulfate | 0.75, 0.90 | 1.11, 1.33 | C | None |
| CAN | 0.70, 0.85 | 1.18, 1.43 | C | None |
The table reads across stowage factor bulk density IMSBC group and UN number so a charterer can instantly see that Group B cargoes carry UN numbers and oxidising or flammable dust hazards while Group C cargoes do not. Urea at the top of the stowage factor range fills holds by volume before reaching deadweight making it a volume limited cargo. Potash and sulfur are weight limited reaching deadweight with significant void space. This distinction drives the vessel class decision in the next section.
The angle of repose governs trimming requirements and the risk of cargo shift during the voyage. Phosphate rock has a steep angle of 35 to 45 degrees depending on particle size and moisture. Formed sulfur rests at 30 to 35 degrees while crushed sulfur is steeper at 35 to 40 degrees. Potash (MOP) typically shows 32 to 38 degrees. Urea prills are lower at 27 to 32 degrees and DAP or MAP granules sit at 30 to 35 degrees. Ammonium nitrate prills range from 28 to 32 degrees. NPK blends vary widely from 28 to 38 degrees based on the dominant granule size. These values come from the IMSBC individual schedules and are confirmed by the master during loading through visual inspection and clinometer readings. A cargo with an angle above 35 degrees generally requires trimming to the boundaries of the hold to meet the Code requirement that the surface slope does not exceed the angle of repose.
Hygroscopicity and caking dictate ventilation strategy and discharge difficulty. Urea is highly hygroscopic with a critical relative humidity near 75 percent at 20 °C and a strong tendency to cake if moisture exceeds 0.3 percent. DAP and MAP are moderately hygroscopic with critical humidity around 85 percent and moderate caking risk. Potash is low hygroscopicity but can cake if free moisture is present. Ammonium nitrate is extremely hygroscopic with severe caking that can form a solid mass. Sulfur is non-hygroscopic but dust creates a flammable atmosphere. Phosphate rock is non-hygroscopic with negligible caking. NPK blends inherit the hygroscopicity of the highest nitrogen component. Ammonium sulfate is moderately hygroscopic with low caking tendency. CAN is highly hygroscopic with significant caking risk. The shipper declaration must state the moisture content at load and the master must record hold humidity daily to prove compliance with the IMSBC ventilation requirements.
Parcel size dictates the vessel class because each class has a distinct deadweight and cubic capacity envelope. Handysize vessels of 28,000 to 40,000 dwt suit parcels of 25,000 to 35,000 tonnes and are the workhorse for regional trades such as Baltic potash to Northern Europe or US Gulf urea to the Caribbean. Supramax at 50,000 to 60,000 dwt handle 45,000 to 55,000 tonne parcels and dominate the North Africa to Europe and Middle East to Asia DAP and MAP routes. Panamax at 70,000 to 82,000 dwt carry 60,000 to 75,000 tonnes and are preferred for transatlantic and transpacific legs where canal dimensions allow. Capesize above 150,000 dwt only appear in very large phosphate rock or sulfur contracts from Morocco or the Middle East to China or India. The Panamax share of fertiliser shipments increased from 21% in 2020 to 24% in 2024 according to Drewry reflecting a shift toward larger parcels on longer routes.
| Vessel Class | DWT Range | Typical Parcel (t) | Ideal Cargo Types | Key Trade Lanes |
|---|---|---|---|---|
| Handysize | 28,000, 40,000 | 25,000, 35,000 | Potash, Urea, NPK, CAN | Baltic, Europe, US Gulf, Caribbean, Black Sea, Med |
| Supramax | 50,000, 60,000 | 45,000, 55,000 | DAP, MAP, Urea, Sulfur | North Africa, Europe, Middle East, SE Asia, US Gulf, Brazil |
| Panamax | 70,000, 82,000 | 60,000, 75,000 | Phosphate Rock, DAP, Urea | Morocco, US/Asia, Jordan, India, US Gulf, China |
| Capesize | 150,000+ | 140,000+ | Phosphate Rock, Sulfur | Morocco, China, Middle East, India/China |
The matrix shows that Handysize and Supramax cover the bulk of nitrogen and phosphate trades while Panamax and Capesize are reserved for high volume rock and sulfur movements. A charterer matches the stowage factor of the cargo to the cubic capacity of the hold; urea at 1.40 m3/t fills a Panamax hold volumetrically leaving deadweight unused whereas potash at 0.80 m3/t hits deadweight first. This cubic versus weight limit calculation is the first step in vessel nomination.
Draft restrictions at load and discharge ports often override the theoretical parcel size. Baltic ports such as Ventspils and Klaipeda limit draft to 11.5 to 12.5 metres favouring Handysize and small Supramax. US Gulf terminals at Tampa and New Orleans accommodate Panamax at 13.5 to 14.5 metres but tide windows apply. Moroccan phosphate ports Jorf Lasfar and Safi accept Capesize at 17 metres. Jordan Aqaba is restricted to Panamax by draft and berth length. Chinese discharge ports vary widely; Qingdao and Fangcheng take Capesize while smaller river ports require Handysize. The master must confirm the latest port circulars for allowable draft air draft and berth occupancy before fixing the vessel. A vessel that arrives too deep faces lightening costs or deviation that erode voyage profit.
Stowage factor directly changes freight revenue because freight is paid per tonne but capacity is cubic. A Panamax with 85,000 m3 grain capacity lifts urea at 1.40 m3/t earning freight on the resulting tonnage. The same vessel lifts potash at 0.80 m3/t earning freight on a higher tonnage. However potash trades often command lower $/t rates than urea because the market knows the vessel carries more tonnes. The charterer must model revenue per cubic metre ($/m3) not $/t to compare cargoes. For urea $25/t equals $17.86/m3. For potash $18/t equals $22.50/m3. This cubic revenue lens explains why owners prefer dense cargoes on long ballast legs and light cargoes on short fronthauls where ballast cost is low.
Hold preparation begins with complete removal of previous cargo residues using freshwater washing followed by mechanical scraping where caking has occurred. Bulkheads and tank tops must be inspected for rust scale, paint flakes, and embedded particles that could contaminate sensitive fertilizers such as urea or ammonium nitrate. All surfaces must pass a visual white-glove test and a pH check between 6 and 8 after washing to confirm no acidic or alkaline residues remain. Drying time depends on ventilation and ambient humidity but a minimum of 24 hours is standard before loading commences. The chief officer signs the hold cleanliness certificate only after independent surveyor verification where charter party terms require it.
Bilge wells are protected by first cleaning them to bare steel then applying a minimum of two coats of bitumastic or epoxy bilge paint compatible with fertilizer leachates. Cement washing uses a 1:3 cement to freshwater slurry brushed onto tank top plating and lower bulkhead sections to seal minor pitting and create an alkaline barrier against acidic fertilizers such as triple superphosphate. The cement wash must cure for at least 12 hours before loading. Bilge suctions are fitted with perforated plates and covered with burlap or geotextile fabric secured by wooden battens to prevent cargo ingress while allowing water drainage. Bilge lines are pressure tested to 1.5 times working pressure before cargo operations begin.
Coating compatibility is determined by the fertilizer chemical class and the vessel trading pattern. Epoxy phenolic coatings rated for continuous immersion in pH 2 to 12 environments are standard for vessels carrying phosphate rock, sulfur, and ammonium phosphate blends. Zinc silicate coatings are acceptable for urea and potash but degrade rapidly under acidic conditions from superphosphates or sulfur. Owners must consult the coating manufacturer technical data sheet for specific cargo resistance lists and maximum exposure temperatures. A coating log recording application date, dry film thickness, and cargo history stays onboard for port state control inspection. Recoating intervals follow the manufacturer specification not the classification society minimum.
| Fertilizer Group | Typical pH Range | Recommended Coating System | Max Cargo Temp (°C) | Bilge Protection Level |
|---|---|---|---|---|
| Urea | 7.0, 8.5 | Zinc silicate or epoxy | 50 | Standard bitumastic |
| DAP / MAP | 7.5, 8.0 | Epoxy phenolic | 50 | Epoxy + cement wash |
| Triple Superphosphate | 1.5, 3.0 | Epoxy phenolic (high build) | 50 | Epoxy + double cement wash |
| Sulfur | 5.0, 7.0 (leachate acidic) | Epoxy phenolic | 60 | Epoxy + cement wash |
| Potash (MOP) | 7.0, 9.0 | Zinc silicate or epoxy | 50 | Standard bitumastic |
| Ammonium Nitrate | 5.5, 7.0 | Epoxy phenolic | 40 | Epoxy + cement wash |
The table above matches major fertilizer groups to coating systems and bilge protection levels based on typical cargo pH and leachate aggressiveness. Epoxy phenolic coatings appear repeatedly because they withstand the acidic leachates from phosphate and sulfur cargoes that destroy zinc silicate films. Maximum cargo temperature limits reflect both coating thermal limits and IMSBC Code ventilation thresholds. Bilge protection escalates from standard bitumastic for neutral cargoes to double cement wash over epoxy for highly acidic leachates. Charterers increasingly require coating certification from approved applicators before fixing vessels for sensitive parcels.
Trimming reduces the peak of the cargo cone to an angle not exceeding the angle of repose stated in the IMSBC schedule for that fertilizer. For urea with an angle of repose of 28 to 32 degrees the spout is moved continuously during loading to build a flat-topped stow. For potash at 32 to 36 degrees and ammonium nitrate at 28 to 32 degrees the same principle applies. Mechanical trimming using a bulldozer or excavator lowered into the hold is standard for Handysize and Supramax vessels at terminals without shore-based trimming chutes. The master ensures trimming is completed before the vessel departs the loading berth and records the final surface profile in the cargo log.
Moisture content must not exceed the transportable moisture limit (TML) or the maximum moisture content specified in the individual IMSBC schedule whichever is lower. Urea typically carries a 0.5 percent maximum moisture limit while DAP and MAP are limited to 1.5 percent. Potash schedules often cite 0.5 percent. The shipper provides a moisture certificate issued within seven days of loading by an accredited laboratory using the oven drying method at 105 degrees Celsius. The master verifies the certificate against the cargo schedule and rejects cargo that exceeds the limit or arrives without valid certification. Random check tests using a handheld moisture meter are conducted during loading as an additional safeguard.
The shipper must provide a safety data sheet (SDS) compliant with the Globally Harmonized System, a shipper's declaration confirming the cargo matches the IMSBC schedule, and for Group B cargoes such as ammonium nitrate a Material Hazards in Bulk (MHB) document detailing emergency procedures. The SDS includes UN number, hazard class, decomposition temperature, and toxicity data. The master confirms all documents are onboard before loading commences and files copies with the cargo manifest. For urea the SDS confirms non-hazardous classification under IMSBC Group C. Urea bulk density specifications are cross-referenced against the shipper declaration to verify stowage factor calculations. Missing or incomplete documentation delays departure and may constitute a breach of charter party obligations.
Trade Fertilizers on Global Trade Plaza: fertilizers on Global Trade Plaza, fertilizers suppliers and exporters, fertilizers buyers and importers, urea 46 prilled granular, agriculture fertilizers pesticides on Global Trade Plaza, green coast fertilizer company gcfc (supplier profile), urea 46 nitrogen fertilizer, urea fertilizer 46 prilled granular, high quality diammonium phosphate dap fertilizer, rock phosphate.
Shippers and operators must match each fertilizer grade to its correct IMSBC schedule, verify the transportable moisture limit and actual moisture content before loading, and confirm hold cleanliness to the standard the specific schedule demands. Group B cargoes such as ammonium nitrate UN 2067 and UN 2071 and sulfur UN 1350 require a Document of Compliance, continuous temperature monitoring logged every four hours, and loading temperatures not exceeding 42 degrees Celsius. Group C cargoes including urea, DAP, MAP, potash, phosphate rock and NPK blends need valid moisture certificates, ventilation plans aligned with hygroscopicity, and stowage factors applied correctly to avoid cubic or weight-limited shortfalls.
Missing a single temperature reading or presenting an outdated moisture certificate can trigger port state control detention, charterparty disputes, or cargo claims that erase voyage profit. Build the documentation package, shipper declaration, hold cleanliness certificate, moisture certificate, and ventilation log, before the vessel arrives at the load port. For verified buyer and supplier contacts in the bulk fertilizer trade, visit Global Trade Plaza.
Urea fertilizer is classified under the UREA schedule as a Group C cargo in the IMSBC Code. It carries no UN number and is not designated as Material Hazardous only in Bulk (MHB). The schedule requires a shipper declaration, moisture certificate, and ventilation appropriate to its hygroscopic nature.
Diammonium phosphate (DAP) fertilizer is classified under the DIAMMONIUM PHOSPHATE schedule as a Group C cargo. It has no UN number and no MHB status. The primary hazards are hygroscopicity and dust generation, requiring standard IMSBC documentation and moisture control.
The stowage factor for bulk urea ranges from 1.30 to 1.45 cubic metres per tonne. This relatively high factor makes urea a cubic cargo that often fills hold volume before reaching weight capacity on Handysize to Panamax vessels.
The angle of repose for muriate of potash (MOP) typically ranges between 30 and 35 degrees depending on particle size and moisture content. This angle determines the trimming requirements to ensure cargo stability within the hold boundaries during the voyage.
Yes, ammonium nitrate fertilizer grades UN 2067 and UN 2071 are permitted for bulk carriage under the IMSBC Code as Group B Materials Hazardous only in Bulk. Carriage requires a ship Document of Compliance, crew MHB training, loading temperature below 42 degrees Celsius, and continuous temperature monitoring every four hours.
Prevent caking by loading cargo below the schedule moisture limit, typically 0.5 percent for urea and 1.5 to 2.0 percent for DAP, according to FAO (via Agro Spectrum) (2025). Maintain surface ventilation only when outside dew point is lower than cargo temperature, and avoid excessive trimming that compacts the surface layer.
Temperature must be monitored at least every four hours during the voyage and recorded in the deck log. Cargo must be loaded at or below 42 degrees Celsius. Any reading exceeding 55 degrees Celsius triggers immediate boundary cooling and preparation for potential jettison procedures.
Sulfur bulk cargo (UN 1350, Group B) requires mechanical surface ventilation to prevent flammable dust accumulation and hydrogen sulphide gas formation. Ventilation must be continuous during loading and voyage, with spark-arrested fans. Personnel entry requires gas-free certification and self-contained breathing apparatus.
Holds must be swept clean of all residues, washed with freshwater, and visually inspected using a white-glove test. Bilge wells require cleaning to bare steel, two coats of bitumastic or epoxy paint, perforated plates, geotextile covers, and pressure testing. A minimum 24-hour drying period is mandatory before loading the next cargo.
Group B cargoes require a ship Document of Compliance, MHB emergency schedule, shipper declaration with transportable moisture limit (TML) and actual moisture, and temperature certificates. Group C cargoes require the shipper declaration, moisture certificate, hold cleanliness certificate, and ventilation log.
Group B fertilizers (ammonium nitrate UN 2067/2071, sulfur UN 1350) possess chemical hazards such as oxidising properties, self-heating, or flammable dust, requiring MHB status, UN numbers, Document of Compliance, and continuous temperature monitoring. Group C fertilizers (urea, DAP, MAP, potash, phosphate rock, NPK) present physical hazards like hygroscopicity and caking only, requiring standard IMSBC documentation without enhanced MHB protocols.
Handysize (15,000 to 35,000 DWT) and Supramax/Ultramax (50,000 to 65,000 DWT) vessels are standard for fertilizer parcels. Panamax/Kamsarmax (75,000 to 82,000 DWT) serve high-volume routes. Capesize vessels are rarely used due to port draft restrictions at typical fertilizer terminals.